Sony STR-DA2800ES User Manual download pdf (Page 87)

Adjusting Settings

x Front B

x No Assign

Note

If the speaker pattern is set so that there are surround

back speakers or front high speakers, you cannot set

the SURROUND BACK/FRONT HIGH/FRONT B/

ZONE 2 terminals for a bi-amplifier connection or a

zone 2 connection.

By using the front high speakers, you can lift

up the sounds of the center speaker to an

appropriate height on the screen, allowing you

to enjoy natural representation without

discomfort.

x 1~10

x Off

Note

• This function does not work in the following cases.

– Headphones are connected.

– There is no center speaker.

– There are no front high speakers.

– The 2CH mode sound field is being used.

– The sound filed for music is being used.

– The “Multi Stereo” sound filed is being used.

Lets you adjust each speaker manually on the

Manual Setup screen. You can also adjust the

speaker levels after “Auto Calibration” is

completed.

Select “Level/Distance/Size,” then

press .

To adjust the speaker level

You can adjust each speaker’s level (center,

surround left/right, surround back left/right,

front high left/right, subwoofer).

1 Select the speaker on the screen for

which you want to adjust the level, then

press .

2 Select “Level,” then press .

You can adjust the level from –20 dB to

+10 dB in 0.5 dB intervals.

You can adjust the front left level from

FL–10.0 dB to FL+10.0 dB in 0.5 dB

intervals. You can also adjust the front right

level from FR–10.0 dB to FR+10.0 dB in

0.5 dB intervals.

To adjust the distance from the

seating position to each

speaker

You can adjust the distance from the seating

position to each speaker (front left/right,

center, surround left/right, surround back left/

right, front high left/right, subwoofer).

1 Select the speaker on the screen for

which you want to adjust the distance,

then press .

2 Select a “Distance,” then press .

You can adjust the distance from 1.0 meter

to 10.0 meters (3 feet 3 inches to 32 feet

9 inches) in 1 cm (1 inch) intervals.

To adjust the size of each

speaker

You can adjust each speaker’s (front left/right,

center, surround left/right, surround back left/

right, front high left/right) size.

1 Select the speaker on the screen for

which you want to adjust the size, then

press .

2 Select a “Size,” then press .

•Large

If you connect large speakers that will

effectively reproduce bass frequencies,

select “Large.” Normally, select “Large.”

•Small

If the sound is distorted, or you feel a lack

of surround effects when using multi-

channel surround sound, select “Small” to

activate the bass redirection circuitry and

output the bass frequencies of each

channel from the subwoofer or other

“Large” speakers.

Center Speaker Lift Up

Speaker Setup

continued

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 133 134

Comments to this Manuals

No comments

Sony STR-DA2800ES User Manual Page 87

Comments to this Manuals

Related products and manuals for AV receivers Sony STR-DA2800ES