Sony STR-DA2800ES User Manual download pdf (Page 69)

Using Other Features

5 Turn the Control for HDMI

function of the connected

equipment on.

For details on setting the connected

equipment, refer to its operating

instructions.

6 Repeat step 5 to set the Control

for HDMI function and to

display the image of all the

playback equipment you want

to use.

Note

When you pull out the HDMI cable or change the

connection, perform the steps above.

However, you do not need to perform these steps

when you use an HDMI IN 1, IN 2, or IN 3 jack.

When you turn the TV off, using the power

button on the TV’s remote control, the receiver

and the connected equipment turn off

automatically.

You can also use the remote control to turn off

the TV.

Press TV, then press ?/1 .

The TV, receiver and connected equipment are

turned off.

Notes

• Set the TV power supply interlock function to on

before using the System Power-Off function. For

details, refer to the operating instructions of the

TV.

• Depending on the condition of the connected

equipment, the connected equipment may not be

turned off. For details, refer to the operating

instructions of the connected equipment.

• If you use the System Power-Off function with a

non-Sony TV, program the remote control

according to the maker of the TV.

When you play back content on the equipment

connected to the receiver via an HDMI

connection, the receiver is also turned on

automatically and is switched to the

appropriate HDMI input.

When you set “Pass Through” to “On,” or

“Auto,” sound and image can be output only

from the TV while the receiver remains in

standby mode.

Start playback on the playback

equipment.

To use the One-Touch Play

function of the camcorder

Turn the Control for HDMI function on

for both the receiver and your

camcorder.

2 Connect your camcorder to one of the

HDMI IN 1, IN 2, and IN 3 jacks

(page 33).

If you use a Sony camcorder, the TV is

turned on in conjunction with the receiver,

then the camcorder starts playback

automatically. If you use a non-Sony

camcorder, play back the camcorder

continuously.

Notes

• Depending on the TV, the start of the content may

not appear.

• Connect equipment such as a Sony camcorder

equipped with the One-Touch Play function simply

by making an HDMI connection to the HDMI

IN 1, IN 2, and IN 3 jacks. If you use other HDMI

IN jacks, the receiver may not be switched to an

appropriate input. In this case, manually select the

input to which the camcorder is connected.

System Power-Off

One-Touch Play

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 133 134

Comments to this Manuals

No comments

Sony STR-DA2800ES User Manual Page 69

Comments to this Manuals

Related products and manuals for AV receivers Sony STR-DA2800ES