Sony STR-DA2800ES User Manual download pdf (Page 124)

124

GB

Cannot connect to the network.

• Check the network connection (page 39)

and the Network Settings menu (page 98).

• Check to see if the port you want to use to

connect the system to a network is

activated.

Cannot find the server.

• Search the server using “Connection

Server Settings” in the Network Settings

menu (page 98).

• Check the following:

– Is the router turned on?

– If there is another device between the

receiver and the router, check that

device is turned on.

– Are all of the cables connected correctly

and securely?

– Is the settings to make sure that they

match the router’s settings (DHCP or

fixed IP address)?

• When using a computer, check the

following:

– The built-in firewall settings for the

computer’s operating system.

– The firewall settings of your security

software. To check the firewall settings

of your security software, refer to your

security software’s Help section.

• Register the receiver with the server. For

details, refer to the instructions supplied

with the server.

• Wait for a few moments, and then try

connecting to the server again.

Cannot find or play back the content on

the server.

• On the “My Music,” “My Photo,” and “My

Video” screens, the receiver displays only

the content that can be played back with

the receiver from among the content

offered by the server within the DLNA

guidelines.

• There may be content that is not played

back or displayed even if that content is

defined in the DLNA guidelines.

Cannot access the receiver from “ES

Remote” or the DLNA controller.

• Make sure the controller you want to use is

set to “Allow” in “Renderer Access

Control” (page 98).

• If you set “Auto Access Permission” to

“On” in “Renderer Options” (page 98),

any controller detected can be available

automatically.

• Is the network controller listed on

“Renderer Options,” and is it set to

“Allow”?

If the box is not checked, check the box for

“Auto Access Permission,” and return to

the home menu. Then, operate the receiver

using the network controller once, and

then uncheck the box for “Auto Access

Permission,” if necessary.

• If the network controller is a computer

software controller, is the software filtered

by antivirus software or firewall software?

Permit UPnP communications between

the software and the receiver. For details,

refer to the operating instructions of the

antivirus software, firewall software, or

network controller software.

The picture/sound is poor/certain

programs display with a loss of detail,

especially during fastmotion or dark

scenes.

• Picture/sound quality may be poor,

depending on Internet content providers.

• Picture/sound quality may be improved by

changing the connection speed. Sony

recommends a connection speed of at least

2.5 Mbps for standard definition video and

10 Mbps for high-definition video.

• Not all videos contain sound.

The picture is small.

• Press V to zoom in.

Network

Internet video

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 133 134

Comments to this Manuals

No comments