Sony STR-DA2800ES User Manual download pdf (Page 42)

Notes

• Depending on the characteristics of the subwoofer

you are using, the setup distance value may be

different from the actual position.

• If you perform “Speaker Settings (Auto

Calibration)” using the Easy Setup, the

measurement results will be overwritten and saved

on the currently selected position (“Pos.1” is

selected as the factory default setting).

Tips

• Depending on the position of the subwoofer, the

measurement results for polarity may vary.

However, there will be no problems even if you

continue to use the receiver with that value.

• Depending on the speakers, “Out Phase” may

appear even if there is no problem with the speaker

connection. This is caused by the speaker

specifications, and there will no problems even if

you continue to use the speakers.

When you connect two

subwoofers to the receiver

If you cannot obtain measurement results of

the “Auto Calibration” function correctly,

depending on the environment, or you want to

make fine adjustments, you can set up the

subwoofers manually. For details, see

“Speaker Setup” in the Speaker Settings menu

(page 87).

Notes on the speaker

impedance

• If you are not sure of the impedances of the

speakers, refer to the operating instructions

supplied with your speakers. (This

information is often on the back of the

speaker.)

• When you connect front speakers to both the

FRONT A and SURROUND BACK/

FRONT HIGH/FRONT B/ZONE 2

terminals, connect the speakers with a

nominal impedance of 8 ohms or higher.

To select the front speakers

You can select the front speakers you want to

drive.

Press SPEAKERS (OFF/A/B/A+B)

repeatedly to select the front speaker

system you want to drive.

You can confirm which set of terminals (A or

B) are selected by checking the indicators in

the display window.

Note

To select a front B speakers, you should set the

assignment for the SURROUND BACK/

FRONT HIGH/FRONT B/ZONE 2 terminals

by using the “Speaker Connection” of the

Speaker Settings menu.

Indicators Selected speakers

SP A The speakers connected to the

FRONT A terminals.

SP B The speakers connected to the

SURROUND BACK/FRONT

HIGH/FRONT B/ZONE 2 terminals.

SP AB The speakers connected to both the

FRONT A and SURROUND BACK/

FRONT HIGH/FRONT B/ZONE 2

terminals (parallel connection).

“SPEAKERS OFF” appears in the

display window.

No audio signals are output from any

speaker terminals.

SPEAKERS (OFF/A/B/A+B)

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 133 134

Comments to this Manuals

No comments

Sony STR-DA2800ES User Manual Page 42

Comments to this Manuals

Related products and manuals for AV receivers Sony STR-DA2800ES