Sony VPL-CX125 User Manual

3-211-161-13 (1)Data ProjectorOperating Instructions for Network© 2007 Sony CorporationVPL-CX155/CX125VPL-CW125

10Preparationx Displaying the mode statusWhen you select [Status] from the action menu, the status of the mode being used is displayed. x Changing the

11PreparationSetting the System SetupWhen [System Setup] is selected in the initial display of the setting menu, the [System Setup] window is displaye

12ConnectionConnectionConnecting to wired LAN• For a LAN connection, contact your network administrator.• When the projector and a computer that has a

13ConnectionConnecting to several projectors at the same time* A maximum of 5 projectors can be connected at the same time.• To connect to LAN, contac

14Connection• When the projector and a computer that has a different network segment (subnet) are connected, set [PC Registration List] (page 10) on

15ConnectionDisconnectingClick the projector button to disconnect the project from the computer. When one projector is connectedWhen multiple projecto

16ConnectionThis is used for the settings of Projector Station for Air Shot Version 2.Displaying the setting window of Projector Station for Air Shot

17Connection[Profile Setting] tabThe [Profile Setting] tab provides the profile settings for connecting to the projector.[Connection Setting] tabWhen

18Setting/Operating via Web[Projector Setting] tabThe IP address of the projector must be specified when the projector has the different network segme

19Setting/Operating via WebAfter access, the following display appears.Click [Information].You can confirm the current state of the projector on the c

2© 2007 Sony Corporation. All rights reserved. Trademark Notice• Windows and Microsoft are registered trademarks of Microsoft Corporation in the Unite

20Setting/Operating via WebClick [Setup].The Setup menu dialog box appears. You can set the Owner information, Password, Date and Time, Mail Report, e

21Setting/Operating via WebTime ZoneSelect the region in which you are using the projector.Date/TimeSet the date and time (MM, DD, YY, HH:MM).Time Ser

22Setting/Operating via WebMon/Tue/Wed/Thu/Fri/Sat/Sun: Specify the days of the week when e-mail is to be sent. You can check two or more days.Every M

23Setting/Operating via Web• If the following items have not been set or are incorrectly set, an error message appears and the test e-mail message is

24OthersOthersTroubleshootingSymptom Cause and RemedyThe projector cannot be detected.The projector cannot be connected.The projector is disconnected

25OthersThe computer and projector are connected in the main window of Projector Station for Air Shot Version 2 but the image cannot be projected on t

26OthersPC: Message displayed on the computerPJ: Message displayed on the projectorMessages on the DisplayMessage PC PJ Cause and RemedyNow searching

27OthersThe Projector is busy.a• The projector you are trying to communicate is performing turning on/off operations. c After the projector operations

28OthersUnable to switch resolution of PC desktop.a• When the screen resolution of the computer is not identical with the projector LCD panel resoluti

29OthersDefault GatewayThis means a router address.DHCPThe function to share the IP Address automatically with the equipment connected to the network.

3Before OperationBefore OperationThis unit is equipped with the network presentation and control function.Any image of a computer, if it is connected

Sony Corporation

4Before Operationfirst projector. If you use VPL-CW125 and another model at the same time, connect VPL-CW125 as the second or third, etc.The network p

5Preparation• Microsoft Windows XP Professional Edition• Microsoft Windows Vista Home Basic• Microsoft Windows Vista Home Premium• Microsoft Windows V

6Preparation3 Install the software according to the “wizard” within the installer.When you use Windows XP Service Pack 2/Vista and the following dialo

7PreparationProjector Station for Air Shot Version 2 starts up automatically.When you are not going to project the pictures, click [OK].After executin

8Preparation4 Press the ENTER key.The setting menu display appears.5 Select [Setup] to set network setting items.To use the network function, set [Sta

9PreparationSetting each modeIn the initial display of the setting menu, the left edge of the mode currently used is displayed in light blue. You can