Sony MHC-V90DW User Manual download pdf (Page 59)

59

GB

Other Operations

MHC-V90DW.GB.4-694-841-31(1)

••

Language Follow

* Control for HDMI is a standard used

by CEC (Consumer Electronics Control)

for allowing HDMI (High-Definition

Multimedia Interface) devices to control

each other.

Note

These functions may work with devices

other than those manufactured by Sony,

but operation is not guaranteed.

Preparing to use the Control for

HDMI function

Press DVD SETUP, then set [HDMI

SETUP] – [CONTROL FOR HDMI] on

the system to [ON] (page40). The

default setting is [ON].

Enable the Control for HDMI function

settings for the TV connected to the

system.

Hint

If you enable the Control for HDMI

(“BRAVIA” sync) function when using a

TV manufactured by Sony, the Control

for HDMI function of the system is also

enabled automatically. When settings are

completed, “COMPLETE” appears on the

display.

System Power Off function

When you turn off the TV, the system

will turn off automatically.

Press DVD SETUP, then set

[HDMI SETUP] – [STANDBY LINKED

TO TV] on the system to [ON] or

[AUTO] (page40). The default

setting is [AUTO].

Note

The connected device may not turn off

depending on the status of the device.

System Audio Control function

If you turn on the system while you

are watching the TV, the TV sound

will be output from the speakers

of the system. The volume of the

system can be adjusted using the

TV’s remote control.

If the TV sound was output from the

speakers of the system the previous

time you watched the TV, the system

will be turned on automatically

when you turn on the TV again.

Operations can also be made by the

TV’s menu. For details, refer to the

operating instructions of your TV.

Note

••

The system’s volume level is displayed

on the TV screen depending on the TV.

It may differ from the volume level on

the display.

••

Depending on the settings of the TV,

the System Audio Control function may

not be available. For details, refer to the

operating instructions of your TV.

Audio Return Channel

If the system is connected to a TV’s

HDMI IN jack compatible with Audio

Return Channel, you can listen to

TV sound from the speakers of the

system without connecting an audio

cable (not supplied).

On the system, press DVDSETUP,

then set [HDMI SETUP] –

[AUDIO RETURN CHANNEL] to [ON]

(page40). The default setting is

[ON].

Note

If the TV is not compatible with Audio

Return Channel, an audio cable (not

supplied) needs to be connected

(page26).

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 91 92

Comments to this Manuals

No comments