Sony HVL-MT24AM User Manual download pdf (Page 32)

HVL-MT24AM_GB 2-889-493-01 (1)

Manual ﬂash (M)

Normal TTL ash metering automatically adjusts the ash intensity to provide

the proper exposure for the subject. Manual ash provides a xed ash intensity

irrespective of the brightness of the subject and the camera setting.



In manual ash mode, the maximum ash power is when the manual ash

control is set to 1/1. Each step of the ash power level corresponds to one

aperture stop. Changing the setting by one stop, for example from 1/1 to 1/2, is

equivalent to decreasing the aperture one stop, for example from f/4 to f/5.6.



Manual ash can only be used when the camera is in the M mode. In other

modes, TTL measuring is automatically selected.



As manual ash is not aected by the reectivity of the subject, it is convenient

for use with subjects with extremely high or low reectivity.

TTL ﬂash metering Manual ﬂash metering

1 Select M mode on the camera.

2 Press the TTL/M/Test button to light on the M (manual-

ﬂash control) lamp.

e modes change in the following order. (Test ash (p. 40), Modeling ash

(p. 41))

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 294 295

No comments

Sony HVL-MT24AM User Manual Page 32