Sony HDR-SR10 User Manual download pdf (Page 69)

69

Customizing your camcorder

b Notes

• When the remaining recordable time for movies

is less than 5 minutes, the indicator stays on the

screen.

When you set to [ON] (the default setting),

you can display the recording date and time

while playing back the image recorded on

your camcorder, on devices compatible

with the subtitle display function. Refer

also to the instruction manual of the display

device.

b Notes

• The images recorded with HD (high definition)

image quality can be played back only on

AVCHD format compatible devices.

• [SUB-T DATE] cannot be set for SD (standard

definition) image quality.

You can select the flash setting when you

record still images with the built-in flash or

an external flash (optional) that is

compatible with your camcorder.

B AUTO

Automatically flashes when there is

insufficient ambient light.

ON ( )

Always uses the flash regardless of the

surrounding brightness.

OFF ( )

Records without flash.

b Notes

• The recommended distance to the subject when

using the built-in flash is approximately 0.3 to

2.5 m (1 to 8 feet).

• Remove any dust from the surface of the flash

before using it. Flash effect may be impaired if

heat discoloration or dust obscures the lamp.

• The /CHG (charge) lamp flickers while

charging the flash, and remains lit when the

battery charge is complete.

• If you use the flash in bright places such as

when shooting a backlit subject, the flash may

not be effective.

You can set this function when you use the

built-in flash, or an external flash (optional)

that is compatible with your camcorder.

HIGH( )

Makes the flash level higher.

B NORMAL( )

LOW( )

Makes the flash level lower.

You can set this function when you record

still images using the built-in flash or an

external flash (optional) that is compatible

with your camcorder.

When you set [REDEYE REDUC] to [ON],

then set [FLASH MODE] to [AUTO] or

[ON], appears. You can prevent redeye

by activating the pre-flash before the flash

flashes.

b Notes

• The redeye reduction may not produce the

desired effect due to individual differences and

other conditions.

Detects faces and adjusts the focus, color

and exposure automatically. Also,

optimizes the face image.

B ON ( )

Detects a face and shows a frame on it. The

detected face image is optimized

automatically.

SUB-T DATE (Subtitle

date)

FLASH MODE

FLASH LEVEL

REDEYE REDUC

FACE DETECTION

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 118 119

Comments to this Manuals

No comments