Sony HDR-SR10 User Manual download pdf (Page 76)

76

GENERAL SET

(Other setup items)

Touch 1, then 2.

If the item is not on the screen, touch /

to change the page.

How to set

(HOME MENU) t page 64

(OPTION MENU) t page 78

The default settings are marked with B.

The default setting is [ON], allowing you to

view the demonstration in about 10

minutes, after you turn the POWER switch

to (Movie).

z Tips

• The demonstration will be suspended in

situations such as those described below.

– When you press START/STOP or PHOTO

– When you touch the screen during the

demonstration (The demonstration starts

again after about 10 minutes)

– When you set the POWER switch to

(Still)

– When you press (HOME) or (VIEW

IMAGES)

The camera recording lamp on the front of

your camcorder lights up, as the default

setting is [ON].

See page 104.

DEMO MODE

REC LAMP (Recording

lamp)

CALIBRATION

B 5 min

The camcorder is automatically turned off

when you do not operate your camcorder

for more than approximately 5 minutes.

NEVER

The camcorder is not automatically turned

off.

b Notes

• When you connect your camcorder to a wall

outlet (wall socket), [A.SHUT OFF] is

automatically set to [NEVER].

You can set the time that you want the

camcorder to remain on before turning off

in sleep mode (p. 32). The default setting is

[10min].

b Notes

• [A.SHUT OFF] does not work during sleep

mode.

The default setting is [ON], allowing you to

use the supplied Remote Commander

(p. 111).

z Tips

• Set to [OFF] to prevent your camcorder from

responding to a command sent by another VCR

remote control unit.

When the drop sensor has detected that the

camcorder has been dropped, your

camcorder may not allow you to record and

play back correctly to protect the internal

hard disk, as the default setting is [ON].

When dropping is detected, appears.

A.SHUT OFF (Auto shut

off)

QUICK ON STBY (Quick

on standby)

REMOTE CTRL (Remote

control)

DROP SENSOR

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 118 119

Comments to this Manuals

No comments