Sony HDR-SR10 User Manual download pdf (Page 21)

21

Getting Started

charge the built-in rechargeable battery and then

set the date and time again (p. 105).

• It takes a few seconds for your camcorder to be

ready to shoot after the power is turned on. You

cannot operate your camcorder during this time.

• The lens cover opens automatically when the

power is turned on. It closes when the playback

screen is selected, or the power is turned off.

• In the setting at the time of purchase, the power

turns off automatically if you leave your

camcorder without any operation attempted for

approximately 5 minutes, to save battery power

([A.SHUT OFF], p. 76).

z Tips

• The date and time does not appear during

recording, but they are automatically recorded

on the media, and can be displayed during

playback (see page 72 for [DATA CODE]).

• Refer to page 98 for information concerning

“World time difference.”

• If the buttons on the touch panel do not work

correctly, adjust the touch panel

(CALIBRATION) (p. 104).

You can change the on-screen displays to

show messages in a specified language. To

select the screen language, touch

(HOME) t (SETTINGS) t [CLOCK/

LANG] t [ LANGUAGE SET]

(p. 75).

Changing the language setting

Step 4: Making

setting adjustments

before recording

Open the LCD panel 90 degrees to the

camcorder (1), then rotate it to the best

angle to record or play (2).

To turn off the LCD backlight to make

the battery last longer

Press and hold DISP/BATT INFO for a few

seconds until appears.

This setting is practical when you use your

camcorder in bright conditions or you want

to save battery power. The recorded image

will not be affected by the setting. To turn

on the LCD backlight, press and hold DISP/

BATT INFO for a few seconds until

disappears.

b Notes

• Do not press the buttons on the LCD frame

accidentally when you open or adjust the LCD

panel.

z Tips

• If you rotate the LCD panel 180 degrees, you

can close the LCD panel with the LCD screen

facing out. This is convenient during playback

operations.

Adjusting the LCD panel

190 degrees to the

camcorder

2180 degrees

(max.)

290 degrees

(max.)

DISP/BATT INFO

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 118 119

Comments to this Manuals

No comments