Sony HDR-SR10 User Manual download pdf (Page 83)

83

Customizing your camcorder

b Notes

• Set [WHITE BAL.] to [AUTO] or adjust the

color in [ONE PUSH] under white or cool white

fluorescent lamps.

• When you select [ONE PUSH], keep framing

white objects while is flashing quickly.

• flashes slowly if [ONE PUSH] could not

be set.

• When [ONE PUSH] was selected, if keeps

flashing after touching , set [WHITE BAL.]

to [AUTO].

• If you set [WHITE BAL.], [SCENE

SELECTION] is set to [AUTO].

z Tips

• If you have changed the battery pack while

[AUTO] was selected, or taken your camcorder

outdoors after inside use (or vice versa), select

[AUTO] and aim your camcorder at a nearby

white object for about 10 seconds for better

color balance adjustment.

• When the white balance has been set with [ONE

PUSH], if you change the [SCENE

SELECTION] settings, or bring your camcorder

outdoors from inside the house, or vice versa,

you need to redo the [ONE PUSH] procedure to

readjust the white balance.

When you set [COLOR SLOW SHTR] to

[ON], appears, and you can record an

image brighter in color even in dark places.

To cancel, touch [OFF].

b Notes

• Adjust the focus manually ([FOCUS], p. 80)

when it is hard to focus automatically.

• The shutter speed of your camcorder changes

depending on the brightness, which may result

in a slowdown of the motion of the image.

The image will be recorded at a maximum

of 16 times the sensitivity of NightShot

recording if you set [SUPER

NIGHTSHOT] to [ON] while the

NIGHTSHOT switch (p. 32) is also set to

ON.

appears on the screen.

To cancel, touch [OFF].

b Notes

• Do not use [SUPER NIGHTSHOT] in bright

places. This may cause a malfunction.

• Do not cover the infrared port with your fingers

or other objects (p. 32).

• Remove any conversion lens (optional).

• Adjust the focus manually ([FOCUS], p. 80)

when it is hard to focus automatically.

• The shutter speed of your camcorder changes

depending on the brightness, which may result

in a slowdown of the motion of the image.

You can record a transition with the

following effects adding to the interval

between scenes.

1 Select the desired effect in [STBY] (to

fading in) or [REC] (to fading out) mode,

then touch .

2 Press START/STOP.

The fader indicator stops flashing and

disappears when the fade is complete.

To cancel the fader before starting the

operation, touch [OFF] in step 1.

If you press START/STOP, the setting is

canceled.

WHITE FADER

BLACK FADER

COLOR SLOW SHTR

(Color Slow Shutter)

SUPER NIGHTSHOT

FADER

STBY REC

Fading out Fading in

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 118 119

Comments to this Manuals

No comments