Sony HDR-SR10 User Manual download pdf (Page 89)

89

Troubleshooting

• If you keep applying vibration on the

camcorder, recording may stop.

There is a time difference between

the point where you press START/

STOP and the point that the

recorded movie starts/stops.

• On your camcorder, there may be a slight

time difference between the point where

you press START/STOP and the actual

point that recording movie starts/stops.

This is not a malfunction.

The horizontal to vertical ratio of the

movie (16:9 (wide)/4:3) cannot be

changed.

• The horizontal to vertical ratio of the movie

recorded with HD (high definition) image

quality is 16:9 (wide).

The auto focus does not function.

• Set [FOCUS] to [AUTO] (p. 80).

• The recording conditions are not suitable

for auto focus. Adjust the focus manually

(p. 80).

[STEADYSHOT] does not function.

• Set [STEADYSHOT] to [ON] (p. 68).

• [STEADYSHOT] may not be able to

compensate for excessive vibrations.

The subjects passing by the screen

very fast appear crooked.

• This is called the focal plane phenomenon.

This is not a malfunction. Because of the

way the image device (CMOS sensor) reads

out image signals, the subjects passing by

the lens rapidly might appear crooked

depending on the recording conditions.

Tiny spots in white, red, blue, or

green appear on the screen.

• The spots appear when you are recording

with [SUPER NIGHTSHOT] or [COLOR

SLOW SHTR]. This is not a malfunction.

The color of the image is not

correctly displayed.

• Set the NIGHTSHOT switch to OFF

(p. 32).

The screen image is bright, and the

subject does not appear on the

screen.

• Set the NIGHTSHOT switch to OFF

(p. 32).

The screen image is dark, and the

subject does not appear on the

screen.

• Press and hold DISP/BATT INFO for a few

seconds to turn on the backlight (p. 21).

Horizontal stripes appear on the

images.

• This occurs when recording images under a

fluorescent lamp, sodium lamp, or mercury

lamp. This is not a malfunction.

[SUPER NIGHTSHOT] cannot be

operated.

• Set the NIGHTSHOT switch to ON.

[COLOR SLOW SHTR] does not

operate correctly.

• [COLOR SLOW SHTR] may not operate

correctly in total darkness. Use NightShot

or [SUPER NIGHTSHOT].

You cannot adjust [LCD BL LEVEL].

• You cannot adjust [LCD BL LEVEL]

when:

– The LCD panel is closed on your

camcorder with the LCD screen facing

out.

– The power is supplied from the AC

Adaptor.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 118 119

Comments to this Manuals

No comments