Sony STR-DA5800ES User Manual download pdf (Page 75)

75

GB

Using Other Features

Using “BRAVIA” Sync

features

“BRAVIA” Sync is the name of a function on

Sony products that enables compatible

equipment connected via HDMI cables to be

operated mutually using the “BRAVIA”

remote control.

This mutual operation is enabled by the

Control for HDMI function using HDMI CEC

(Consumer Electronics Control) standardized

for HDMI (High-Definition Multimedia

Interface).

By connecting Sony equipment that are

compatible with the “BRAVIA” Sync with an

HDMI cable (not supplied), operation is

simplified as below:

• System Power-Off (page 76)

• One-Touch Play (page 76)

• System Audio Control (page 77)

• Audio Return Channel (ARC) (page 77)

• Scene Select (page 77)

• Home Theatre Control (page 77)

• Remote Easy Control (page 77)

The Control for HDMI function

does not work in the following

cases:

• When you connect the receiver to a device

which does not correspond to the Sony

Control for HDMI function.

• When you connect the receiver and

equipment using other than an HDMI

connection.

• The Control for HDMI function does not

work on a device connected to the HDMI

OUT B jack of the receiver.

• When you set “Zone2 Out” in the “HDMI

Settings” menu to “On,” you cannot use the

“Control for HDMI” function.

We recommend that you connect the receiver

to products featuring “BRAVIA” Sync.

Notes

• The following features may operate with non-Sony

equipment. However, compatibility with all non-

Sony equipment is not guaranteed.

– System Power-Off

– One-Touch Play

– System Audio Control

• The following features are Sony proprietary

functions. They can not operate with non-Sony

equipment.

–Scene Select

– Home Theatre Control

• Equipment not compatible with “BRAVIA” Sync

can not activate these features.

To use the “BRAVIA” Sync, turn the Control

for HDMI function on for both the receiver

and the connected equipment.

Turn the Control for HDMI function of the

receiver and the connected equipment on

individually.

1 Select “Settings” from the

home menu, then press .

2 Select “HDMI Settings,” then

press .

3 Select “Control for HDMI,” then

press .

4 Select “On,” then press .

The Control for HDMI function of the

receiver is activated.

Using Other Features

What is “BRAVIA” Sync?

Preparing for the “BRAVIA”

Sync

continued

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 150 151

Comments to this Manuals

No comments