Sony STR-DA5800ES User Manual Page 100

  • Download
  • Add to my manuals
  • Print
  • Page
    / 151
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 99
100
GB
Audio Settings
You can adjust settings for the audio to suit
your preference.
The D.L.L. function is Sony proprietary
technology that allows low quality digital
audio signals and analog audio signals to be
played back with high quality sound.
x Off
x Auto 1
This function is available for lossy
compression audio formats and analog audio
signals.
x Auto 2
This function is available for Linear PCM
signals, as well as lossy compression audio
formats and analog audio signals.
Notes
This function may not work, depending on the
content via a USB device, or a home network.
This function works when “A.F.D. Auto” is
selected. However, this function does not work in
the following cases.
Linear PCM signals with a sampling frequency
of other than 44.1 kHz are being received.
Dolby Digital Plus, Dolby Digital EX, Dolby
TrueHD, DTS 96/24, DTS-ES Matrix 6.1, DTS-
HD Master Audio, or DTS-HD High Resolution
Audio signals are being received.
Lets you set the sound optimizer function
(page 66).
x Off
x Low
x Normal
Lets you adjust the bass, middle*, and treble
level for each speaker (page 66).
(* for the center speaker only.)
The LFE Time Alignment function allows you
to shift the output timing of the LFE channel
by –20ms (delay) to +20ms (forward) for other
channels. This function is effective for
adjusting content in which the LFE channel
phase has a gap from that of other channels.
Note
• This function does not work in the following cases.
“MULTI IN” is selected.
“2ch Analog Direct” is being used.
Lets you prevent signals from being output via
the PRE OUT SUBWOOFER jacks.
x Off
The PRE OUT SUBWOOFER jacks output
signals.
x On
The PRE OUT SUBWOOFER jacks do not
output signals.
Note
• This function does not work in the following cases.
Headphones are connected.
“2ch Analog Direct” is selected.
“2ch Stereo” is selected.
A speaker pattern without a subwoofer is
selected.
Lets you select the language you want when
you listen to the dual audio of a digital
broadcast when available. This feature only
functions for Dolby Digital sources.
Digital Legato Linear (D.L.L.)
Sound Optimizer
Equalizer
LFE Time Alignment
Subwoofer Muting
Dual Mono
Page view 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 150 151

Comments to this Manuals

No comments