Sony STR-DA5800ES User Manual download pdf (Page 110)

110

GB

Network Settings

You can adjust the settings for the network.

Lets you check or change the network settings.

You can change the settings for the following

items either manually or automatically.

–IP Address

– DNS

–Proxy Server

Connect the receiver to the network

beforehand. For details, see “5: Connecting to

the network” (page 44).

LAN Port Activation

Lets you set whether or not to activate each

LAN port on the rear panel.

Among the four LAN ports on the rear panel,

check the ports that you want to activate. The

receiver will use the activated ports to access a

network.

By disabling unused ports, you can save power

consumption. The ports not connected to a

router or a hub will be grayed out.

Lets you set whether or not to display the

connected DLNA server.

x Renderer Name

Shows the renderer name of the receiver.

x Auto Access Permission

Sets whether or not to allow automatic access

from newly detected DLNA controller.

Lets you set whether or not to accept

commands from DLNA controllers.

Lets you turn the function which controls the

receiver from “ES Remote” on the home

network on or off.

x Off

x On

Lets you turn on or off the function that

activates the switching hubs on the rear of the

receiver and allows a network controller, “ES

Remote,” etc., to control the receiver even

when it is in standby mode. In the network

standby mode, the start-up time of the GUI and

the network function will be reduced after the

receiver is turned on.

x Off

The Network Standby mode is disabled and

the receiver enters the normal standby mode

when it is in standby mode.

x On

The Network Standby mode is enabled and the

receiver enters the Network Standby mode

when it is in standby mode.

Internet Settings

Connection Server Settings

Renderer Options

Renderer Access Control

External Control

Network Standby

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 150 151

Comments to this Manuals

No comments