Sony STR-DA5800ES User Manual download pdf (Page 112)

112

GB

Zone Settings

You can adjust settings for the main zone, zone

2 or zone 3.

To turn the power on or off for

zone 2/zone 3

You can turn zone 2 or zone 3 operation on or

off.

1 Select the zone you want to turn on or

off, then press .

2 Select “On” or “Off,” then press .

•On

•Off

To select the output source for

each zone

You can select the source that is output to the

zone. Audio and video signals are output to

zone 2, while only audio signals are output to

zone 3.

1 Select the zone to which you want to

output video/audio signals, then press

.

2 Select “Input,” then press .

3 Select the input, then press .

To adjust the volume for zone 2

If the SURROUND BACK (ZONE 2)

terminals are used with a zone 2 connection,

you can also adjust the volume of zone 2.

If you set “Line Out” to “Variable,” you can

also adjust the volume using “Zone Control.”

If you want to adjust the volume of zone 2 in

zone 2 using the remote control, see

“Operating the receiver from another zone

(ZONE 2/ZONE 3 operations)” (page 73).

1 Select the zone for which you want to

adjust the volume, then press .

2 Select “Volume,” then press .

3 Adjust the volume, then press .

To preset the volume for main

zone/zone 2

You can preset the volume of turning the

power on for each zone.

1 Select the zone for which you want to

preset the volume, then press .

2 Select “Preset Volume,” then press .

3 Adjust the volume, then press .

During the adjustment, the sound is output

at the volume level to which you have

adjusted it, regardless of the value of

MASTER VOLUME control.

If you select “Off,” each zone is activated at

the same volume as that in effect when you

turned the power off last time.

Note

• You cannot preset the volume in the following

cases.

– The SURROUND BACK (ZONE 2) terminals

are used for the surround back speakers or the

front high speakers, or are used with a bi-

amplifier connection.

– “Line Out” is set to “Fixed.”

Line Out

You can set the volume control for the ZONE

2 AUDIO OUT jacks to “Variable” or “Fixed.”

For details, see “Set the volume control for

zone 2” (page 71)

x Fixed

x Variable

12V Trigger

Lets you select various options for use of the

12V Trigger function.

Zone Control

Zone Setup

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 150 151

Comments to this Manuals

No comments