
− 8 (GB) −
Installing the Base on the
wall
Use four or more screws of 8 mm diameter
or equivalent (not supplied).
Install the Base (20) on the wall
horizontally.
Preparing for the installation
of the TV
Refer to the Setup Guide for stand installation.
1 Remove the stand cover and
terminal covers.
2 Remove the screws from the
rear of the TV.
3 Attach the Attachment parts for
Wall-Mount Bracket. Check the
Attachment parts by referring to
“Supplied with SU-WL450” in
“Checking the parts” on page
5.
Note
Firmly secure the Attachment parts using screws.
When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
Be sure to store the unused parts in a safe place for
future use. Retain this manual for future reference.
Comments to this Manuals