Sony MZ-NH1 User Manual download pdf (Page 12)

MZ-NH1

OUTLINE

A key having no particular description in the text, indicates a set

key.

1. ENTERING THE TEST MODE

Preparation:

Copy the “TestMode_Enter_For_NH1_NH3D_Ver***.exe” folder

of the PC application of the latest version to your PC in advance.

(operating system: Windows 2000, Windows XP)

Also, when using this application, the SonicStage Ver. 2.0 or 2.1 is

necessary, and install it in your PC in advance.

Procedure:

1. If a Simple Burner has run on the PC, finish it (including the

one that is resident in the task tray).

2. Start the “TestMode_Enter_For_NH1_NH3D_Ver***.exe”.

3. Insert the fully charged lithium-ion battery (LIP-4WM).

4. Open and close the top panel of the main unit to wait until the

system reading finished.

5. Connect the main unit and PC by USB cable.

6. Check by device manager screen from property of “My

computer” that the set is recognised to your PC normally.

7. Click the [Enter TestMode] button on the screen of application

8. Disconnect the USB cable, when “OK” message is displayed

on the application screen.

9. Remove the lithium-ion battery.

Screen of the PC application “TestMode_Enter_For_NH1_NH3D_

Ver***.exe”

(“***” is version number)

Note: Once the test mode is activated with this application, the test mode

is then activated forcibly by only turning on the power.

After the repair completed, be sure to release the test mode by using

this application once more.

SECTION 4

TEST MODE

2. OPERATION IN SETTING THE TEST MODE

• When the test mode becomes active, first the Display Check

mode is selected.

• Other mode can be selected from the Display Check mode.

• When the test mode is set, the LCD repeats the following

display.

• When the x key is pressed and hold down, the display at that

time is held so that display can be checked.

Display check mode:

•

Display of the main unit

•

Display of the remote commander

3. RELEASING THE TEST MODE

Procedure:

1. If a Simple Burner has run on the PC, finish it (including the

one that is resident in the task tray).

2. Start the “TestMode_Enter_For_NH1_NH3D_Ver***.exe”.

3. Insert the fully charged lithium-ion battery (LIP-4WM).

4. Open and close the top panel of the main unit to wait until the

system reading finished.

5. Connect the main unit and PC by USB cable.

6. Check by device manager screen that the set is recognised to

your PC normally.

7. Click the [Exit TestMode] button on the screen of application

8. Disconnect the USB cable, when “OK” message is displayed

on the application screen.

9. Remove the lithium-ion battery.

All lit

All off

Microcomputer

version

display

001

Ver *.***

All lit

All off

Microcomputer

version display

Ver *.***

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

Comments to this Manuals

No comments

Sony MZ-NH1 User Manual Page 12

Comments to this Manuals

Related products and manuals for Minidisc players Sony MZ-NH1