Sony DVP-NS300 User Manual download pdf (Page 44)

If you press DISPLAY twice during

playback, the format of the current audio

signal (Dolby Digital, MPEG audio, DTS,

PCM, etc.) appears as shown below.

Example

• Dolby Digital 5.1 ch

• Dolby Digital 3 ch

• PCM (Stereo)

About audio signals

Audio signals recorded in a disc contain the

sound elements (channels) shown below.

Each channel is output from a separate

speaker.

• Front (L)

• Front (R)

• Center

• Rear (L)

• Rear (R)

• Rear (Monaural): This signal can be either

the Dolby Surround Sound processed

signals or the Dolby Digital sound’s

monaural rear audio signals.

• LFE (Low Frequency Effect) signal

Note

If “DTS” is set to “OFF” in “AUDIO SETUP,” the

DTS track selection option will not appear on the

screen even if the disc contains DTS tracks. (page 63)

Checking the audio signal format

3 / 2 .1

DOLBY DIGITAL

Rear (L/R)

Front (L/R)

+ Center

LFE (Low Frequency

Effect)

DOLBY DIGITAL 2 / 1

Front (L/R) Rear

(monaural)

PCM 96kHz 24bit

Quantized bit rate

Sampling frequency

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

No comments

Sony DVP-NS300 User Manual Page 44