Sony DAV-SC6 User Manual Page 70

  • Download
  • Add to my manuals
  • Print
  • Page
    / 180
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 69
70
GB
The surround effect is difficult to hear when
you are playing a Dolby Digital, DTS, or MPEG
audio sound track.
Make sure the sound field function is on
(page 43).
Check the speaker connections and settings (pages
21, 65).
Depending on the DVD, the output signal may not
be the entire 5.1 channel. It may be monaural or
stereo even if the sound track is recorded in Dolby
Digital or MPEG audio format.
The sound comes from the centre speaker
only.
Depending on the disc, the sound may come from
the centre speaker only.
No sound is heard from the centre speaker.
Check the speaker connections and settings.
Make sure the sound field function is on
(page 43).
No sound or only a very low-level sound is
heard from the surround speakers.
Check the speaker connections and settings.
Make sure the sound field function is on
(page 43).
Select a sound field containing the word “C. ST.
EX” (page 44).
Depending on the source, the effect of the
surround speakers may be less noticeable.
Operation
Radio stations cannot be tuned in.
Check that the aerials are connected securely.
Adjust the aerials or connect an external aerial if
necessary.
The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use direct
tuning.
No stations have been preset or the preset stations
have been cleared (when tuning by scanning
preset stations). Preset the stations (page 56).
Press DISPLAY so that the frequency appears in
the display.
The remote does not function.
There are obstacles between the remote and the
system.
The distance between the remote and the system is
too far.
The remote is not pointed at the remote sensor on
the system.
The batteries in the remote are weak.
The disc does not play.
There is no disc inserted.
The disc is upside down.
Insert the disc with the playback side facing down
on the disc tray.
The disc is skewed in the system.
The system cannot play CD-ROMs, etc. (page 7).
The region code on the DVD does not match the
system.
Moisture has condensed inside the system.
Remove the disc and leave the system turned on
for about half an hour (page 2).
The MP3 audio track cannot be played.
The DATA CD is not recorded in an MP3 format
that conforms to ISO9660 Level 1/ Level 2 or
Joliet.
The MP3 audio track does not have the extension
“.MP3.”
The data is not formatted in MP3 even though it
has the extension “.MP3.
The system can only play MP3 (MPEG1 Audio
Layer3) audio.
Remove the disc and select “CUSTOM SETUP”
from the setup items. Then select “DATA CD
PRIORITY” and set to “MP3” again.
Directory level is more than 8.
The title of the MP3 audio album or track is not
correctly displayed.
The system can only display alphabetical letters
and numbers. Other characters are displayed as
“”.
Page view 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 179 180

Comments to this Manuals

No comments