Sony LBT-LX10AV User Manual

Operating InstructionsOwner’s RecordThe model and serial numbers are located on the rear panel. Record theserial number in the space provided below. R

10MHzDOLBY NRVOLUMETUNEDALL DISC SAUTOSTEREOOFF3 Press TUNING +/–.The frequency indication changes andscanning stops when the system tunes ina station

11Saving power instandby mode(For LBT-LX90AV/LX9AV only)In standby mode, you can reduce the powerconsumption to a minimum (Power Savingmode) and save

12Tips• Each time you press POWER SAVE/DEMO(STAND BY) in the Power Saving mode, thedisplay switches between the Power Saving modeand the demo mode.• T

13Basic OperationsDOLBY NRVOLUMEALL DISC SOFFPlaying a CD— Normal PlayBasic OperationsYou can play up to five CDs in a row.1 Press PUSH OPEN and place

14ToStop playbackPauseSelect a trackFind a pointin a trackSelect a CDPlay only theCD you haveselectedPlay all CDsRemove orchange theCDsAdjust thevolum

15Basic OperationsListening to theradio— Preset TuningBefore using this function, preset radiostations in the tuner’s memory (see “Step4: Presetting r

16Tips• Pressing TUNER/BAND while the system poweris off automatically turns on the system and tunesin the last received station (One Touch Play).One

17Basic OperationsRecording from theradioYou can record a radio program onto a tapeby tuning in a preset station. You can useTYPE I (normal) or TYPE I

18Tips• When you want to record on the reverse side,press h after pressing z REC in step 5 so that theindicator on the h button (for the reverse side)

19Basic OperationsTo search for the beginning of atrack (AMS)Press M to search forward or m to searchbackward when playing the front side (orvice-vers

2WARNINGTo prevent fire or shock hazard, do notexpose the unit to rain or moisture.To avoid electrical shock, do not open the cabinet.Refer servicing

20Recording from atape— High-speed DubbingYou can use TYPE I (normal) or TYPE II(CrO2) tapes. The recording level isautomatically adjusted.1 Press A E

21tt tttThe CD PlayerUsing the CDdisplayYou can check the remaining time of thecurrent track or that of the CD.When a CD TEXT disc is loaded, you canc

22Playing CD tracksrepeatedly— Repeat PlayThis function lets you repeat a single CD orall CDs in Normal Play, Shuffle Play, andProgram Play.REPEATPLAY

23Programming CDtracks–– Program PlayYou can create a program of up to 32 tracksfrom all the CDs in the order you want themto be played.2145x3,68To ca

24DOLBY NRVOLUMEPROGRAMOFF1 Place CDs and close the front cover.2 Press FUNCTION repeatedly until“CD” appears in the display.3 Press PLAY MODE repeate

25Playing CDswithoutinterruption–– Non-Stop PlayYou can play CDs without pausing betweentracks.1321 Press FUNCTION repeatedly until“CD” appears in the

26You can record from CDs, tapes, or the radio.For example, you can record just the desiredsongs or begin recording from the middle of atape. The reco

27DOLBY NRVOLUMEPROGRAMOFFRecording CDs byspecifying thetrack order— Program EditYou can record tracks from all the CDs in theorder you want. When pro

288 Repeat steps 5 through 7 to programadditional tracks to be recorded onside A.Skip step 5 to select tracks from the samedisc.9 Press X on the remot

29Looping part of aCD— LoopFlashing part of aCD— FlashDJ EffectsWith the Loop function, you can repeat partof a CD during playback. This lets you crea

3* For LBT-LX90AV/LX9AV only**For European model onlyTable of ContentsGetting StartedStep 1: Hooking up the system... 4Step 2: Setting up the

30Adjusting thesoundSound AdjustmentFor a powerful sound (GROOVE)Press GROOVE.The volume switches to power mode, thesound effect changes, the super wo

31Selecting the audioemphasisThe audio emphasis menu lets you select thesound characteristics according to the musicyou are listening to.You can also

32Adjusting theaudio emphasisYou can adjust the audio emphasis using thegraphic equalizer and surround effect.Adjusting the graphicequalizerYou can ad

333 Press b/B repeatedly to select afrequency band.4 Press v/V to adjust the level.5 Repeat steps 3 and 4 to adjust theother frequency bands.6 Press E

34Making a personalaudio emphasis file— Personal FileYou can create personal files of audiopatterns (surround effect and graphicequalizer) and store t

35You can enjoy the Dolby Pro Logic Surroundsound of Dolby Surround-encoded( ) videos and TV programs.Complete the setup and sp

36Other FeaturesttttLocating a station byprogram type (PTY)You can locate the desired station by selectinga program type. The system tunes in that typ

374 Press TUNING +/– until the desiredpreset station number flashes in thedisplay.5 Press ENTER/NEXT while thepreset station number is flashing.To sto

38Singingalong: KaraokeYou can sing along with any stereo CD ortape by turning down the singer’s voice. Youneed to connect an optional microphone.1,5

39Mixing and recordingsounds566x3 Press MIX GUITAR/KARAOKErepeatedly to obtain the karaokeeffect.Each time you press this button, thedisplay changes a

4Getting StartedStep 1: Hooking up the systemFollow steps 1 through 4 to hook up your system using the supplied cords and accessories.The above illust

40Falling asleep tomusic— Sleep TimerYou can set the system to turn off at a presettime, so you can fall asleep listening to music.You can preset the

41tWaking up tomusic— Daily TimerYou can wake up to music at a preset timeevery day. Make sure you have set the clock(see “Step 3: Setting the time” o

42Timer-recordingradio programsTo timer-record, you must preset the radiostation (see “Step 4: Presetting radio stations”on page 10) and set the clock

43RECDOLBY NRVOLUMEALL DISC SOFFNotes• The system turns on 15 seconds before the presettime.• If the system is on at the preset time, the Timerrecordi

44Connecting an MD deckfor digital recordingYou can record a CD to an MD digitally byconnecting your MD deck using an opticalcable. Refer to the instr

45continuedConnecting a mixer (forEuropean, NorthAmerican, and Mexicanmodels only)You can connect a mixer to the DJ MIX jackson the rear pannel of the

46Connecting videocomponentsYou can connect a VCR, camcorder, or videogame to the VIDEO 1 jack on the rear paneland/or the VIDEO2 INPUT jack on the fr

47You canTurn on or off the TVSelect the input source for the TVAdjust the volume of the TVChange the channel of the TVBy pressingTV ?/1TV/VIDEOTV VOL

48To the video output ofthe DVD playerTo the front outputsof the DVD playerConnecting video components(continued)To the rearoutputs of theDVD playerTo

49When your DVD player has stereoanalog outputsBe sure to match the color of the plugs andthe connectors. Connect the LINE OUT(audio) output jack of y

5AMCOAXIALFM 75FM 75AM2 Connect the FM/AM antennas.Set up the AM loop antenna, thenconnect it.AM loop antennaExtend the FM wireantenna horizontally

50AMCOAXIALFM 75AMFM 75AMCOAXIALFM 75AMFM 75Insulated wire (not supplied)AM antennaConnect a 6 to 15 meter (20 to 50 feet)insulated wire to the

51On operating voltageBefore operating the system, check that theoperating voltage of your system is identical withthe voltage of your local power sup

52TroubleshootingIf you run into any problem using this stereosystem, use the following checklist.First, check that the power cord is connectedfirmly

53SpeakersThere is no sound and “PUSH POWER” and“PROTECT“ appears in the displayalternately.•Press ?/1 to turn off the system andcheck the speaker con

54SpecificationsFor the U.S. modelAUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTALHARMONIC DISTORTION:With 6 ohm loads, both channels driven, from120

55LBT-LX10AVFront Speaker:The following measured at AC 120/220/240 V,50 HzDIN power output (Rated)150 + 150 watts(6 ohms at 1 kHz, DIN)Continuous RMS

56Specifications (continued)Tape player sectionRecording system 4-track 2-channel stereoFrequency response (DOLBY NR OFF)40 – 13,000 Hz (±3 dB),using

57GeneralPower requirementsNorth American model: 120 V AC , 60 HzEuropean model: 230 V AC, 50/60 HzMexican model: 120 V AC , 50/60 HzAustralian model:

58IndexKKaraoke 38to reduce the vocals(KARAOKE ) 39LLoop 29MMicrophonemixing 39Mixing sound 39NNormal Play 13Non-Stop Play 25OOne Touch Play 14, 16, 1

59

6Inserting two R6 (size AA)batteries into the remoteTipWith normal use, the batteries should last for aboutsix months. When the remote no longer opera

60Sony Corporation Printed in Indonesia

7By connecting the supplied speakers, you canenjoy Dolby Pro Logic Surround sound.Dolby Pro Logic Surround is a decodingsystem standardized in TV prog

8Step 2: Setting up the speakers(continued)1 Press PRO LOGIC.The button lights up.2 Press T. TONE on the remote.The test tone is heard from the speake

9Step 3: Setting thetimeYou must set the time before using the timerfunctions. The clock is on a 24-hour systemfor European model, and a 12-hour syste