Sony MDX-M690 User Manual download pdf (Page 33)

By pushing in and rotating the control

Push in and rotate the control to:

– Receive preset stations.

– Change the disc*.

* When an optional CD/MD unit is connected.

Tip

You need to push in and rotate the control each time

you select a preset station and a disc.

Changing the operative direction

The operative direction of controls is factory-set

as shown below.

If you need to mount the rotary commander on

the right hand side of the steering column, you

can reverse the operative direction.

RM-X5S

Set the Rev/Nor-select switch to “Rev.”

RM-X4S

Press (SOUND) for 2 seconds while

pushing the VOL control.

Quickly attenuating the

sound

(With the rotary commander or the card

remote commander)

Press (ATT) on the rotary commander

or card remote commander.

“ATT on” appears in the display momentarily.

To restore the previous volume level, press

(ATT) again.

Tip

When the interface cable of a car telephone is

connected to the ATT lead, the unit decreases the

volume automatically when a telephone call comes in

(Telephone ATT function).

Selecting the spectrum

analyzer

The sound signal level is displayed on a spectrum

analyzer. You can select a display for 5 patterns

(A-1, A-2, B-1 to B-3), or the automatic display

mode and “OFF” where all the patterns appear.

1 Press (SOURCE) to select a source

(radio, CD, or MD).

2 Press (MENU).

3 Press M or m repeatedly until “SA”

appears.

4 Press < or , repeatedly to select the

desired setting.

5 Press (ENTER).

PRESET/DISC

control

To increase

To decrease

Rev Nor

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 205 206

Comments to this Manuals

No comments

Sony MDX-M690 User Manual Page 33

Comments to this Manuals

Related products and manuals for Car media receivers Sony MDX-M690