Sony MDX-M690 User Manual download pdf (Page 19)

19

Receiving traffic

announcements

— TA/TP

By activating the Traffic Announcement (TA)

and Traffic Programme (TP), you can

automatically tune in an FM station broadcasting

traffic announcements. These settings function

regardless of the current FM programme/source,

CD/MD; the unit switches back to the original

source when the bulletin is over.

Press (TA) repeatedly until “TA

on”

appears.

The unit starts searching for traffic

information stations.

“TP” indicates reception of such stations, and

“TA ” flashes during an actual traffic

announcement. The unit will continue

searching for stations available with TP if

“NO TP” is indicated.

To cancel all traffic announcements, select

“TA

off.”

Tip

You can also cancel the current announcement by

pressing (SOURCE) or (MODE).

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements so you won’t miss hearing them.

1 Press (VOL) to adjust the desired

volume level.

2 Press (TA) for 2 seconds.

“TA ” appears and the setting is stored.

Receiving emergency announcements

If either AF or TA is on, the unit will switch to

emergency announcements, if one comes in

while listening to an FM station or CD/MD.

Presetting RDS stations with

AF and TA setting

When you preset RDS stations, the unit stores

each station’s AF/TA setting (on/off) as well as

its frequency. You can select a different setting

(for AF, TA, or both) for individual preset

stations, or the same setting for all preset

stations. If you preset stations with “AF on,” the

unit automatically stores stations with the

strongest radio signal.

Presetting the same setting for all

preset stations

1 Select an FM band (page 15).

2 Press (AF) and/or (TA) to select

“AF

on” and/or “TA on.”

Note that selecting “AF off” or “TA off”

stores not only RDS stations, but also non-

RDS stations.

3 Press (MENU), then press M or m

repeatedly until “BTM” appears.

4 Press (ENTER) until “BTM” flashes.

Presetting different settings for each

preset station

1 Select an FM band, and tune in the

desired station (page 16).

2 Press (AF) and/or (TA) to select

“AF

on” and/or “TA on.”

3 Press the desired number button ((1)

to (6)) until “MEM” appears.

Repeat from step 1 to preset other stations.

To Press

Cancel current

announcement

(TA)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 205 206

Comments to this Manuals

No comments