Sony MDR-DS5000 Operations Instructions download pdf (Page 13)

Preparation

45°

Digital surround

processor

Approx.

4 m

Infrared beams

Approx.

10 m

Approx.

4 m

Infrared transmission area

The approximate infrared transmission area from the digital surround processor is

shown in the illustration below.

Notes

• Because this system uses infrared beams, even if the headphones are within the transmission

area shown above, electrical noise (hissing noises) may increase as the headphones get farther

away from the digital surround processor. Also, if the infrared beams are blocked, the sound

may be interrupted or noise may be heard. This is due to the infrared beam characteristics and

is not a malfunction.

• Do not cover the infrared beam sensor with your hand or hair.

• As long as the headphones are in the transmission area shown in the illustration above, the

headphones can have any orientation with respect to the digital surround processor (facing,

turned 90°, or turned 180°).

• The sound may differ depending on the digital surround processor position and conditions in

the room. It is recommended that you place the digital surround processor in the location

which produces the clearest sound.

• Mixed signals may result if the digital surround processor is used with other processors or

transmitters.

(Continued)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 115 116

No comments

Sony MDR-DS5000 Operations Instructions Page 13