Sony FWD-S42E1 User Manual download pdf (Page 51)

Parts Description

1 Main power switch Turn the main power switch to “ON”(press the side) when setting up the device.

When the main power switch is turned “OFF” (press the side), the power consumption

is 0W.

2 AC IN socket Connect the supplied AC power cord to this socket and to a wall outlet. See page 19.

Once you connect the AC power cord and turn on main power switch, the

1 indicator

lights up in red and the display goes into the standby mode.

3 SPEAKER socket Connect the speakers SS-SPG02 (not supplied) to this socket. For more details on

connecting the speakers, see the operating manual that came with the speakers. For details

on how to route the speaker cords, see page 20.

4 Speaker installation

positions

Attach the dedicated speakers SS-SPG02.

5 Stand installation holes Screw holes conforming to VESA standard. (Pitch: 400mm × 400mm, Screw: M6)

When a VESA mount compatible stand or the like is installed, the recommended value for

the screw tightening torque is 2N·m (20kgf·cm).

6 Applicable Tabletop Stand

installation holes

Use these hooks to install the Tabletop Stand SU-S01 (not supplied).

7 Dedicated Tabletop Stand

installation hole cover

Remove when mounting the Tabletop Stand SU-S01 (not supplied).

8 1 (power) Switches the display on or off (standby).

Operate when the main power switch is “ON” ( side).

9 INPUT/ (enter) Press to select a signal to be input from the HD15 (RGB/COMPONENT) IN connector,

DVI IN connector or OPTION slot.

The signal to be input switches as follows each time you press the INPUT button.

When an optional adaptor supporting the video signal is not installed in the OPTION slot,

OPTION will be skipped.

Press to set your choice.

0 (volume/cursor)

+/–/F/f

Press to control speaker volume. When the menu is displayed, press to move the cursor or

set a value.

Press to set your choice.

qa MENU/ (return) Press to show menus.

This returns to the preceding menu screen.

qs CONTROL S OUT

(Mini jack)

You can control pieces of multiple equipment with a single remote control when the

display is connected to the CONTROL S IN jack of the video equipment or another

display.

qd REMOTE

(D-sub 9-pin)

This connector allows remote control of the display using the RS-232C protocol. For

details, contact your authorized Sony dealers.

qf HD15 (RGB/

COMPONENT)

(D-sub 15-pin)

AUDIO

(Stereo mini jack)

HD15 (RGB/COMPONENT) IN: Connects to the analog RGB signal or component

signal output of a piece of video equipment or PC. See page 37.

AUDIO IN: Inputs an audio signal. Connects to the audio signal output of a piece of

video equipment or PC.

When inputting a component signal, be sure not to input sync signals to pins 13 and 14. If

you do so, the picture may not be displayed properly.

qg DVI

(DVI-D 24-pin)

AUDIO

(Stereo mini jack)

DVI IN: Connects to the digital signal output terminal of the video equipment or PC.

Supports HDCP copy protection.

AUDIO IN: Inputs an audio signal. Connects to the audio signal output of a piece of

video equipment, etc.

Note

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 254 255

Comments to this Manuals

No comments

Sony FWD-S42E1 User Manual Page 51

Comments to this Manuals

Related products and manuals for Monitors Sony FWD-S42E1