Sony VPL-CX70 User Manual Page 46
- Page / 180
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
GB
46 Troubleshooting
Picture
Symptom Cause and Remedy
No picture. • Cable is disconnected or the connections are wrong.
c Check that the proper connections have been made
(see page 20).
• The connections are wrong.
c This projector is compatible with a DDC2B (Digital Data
Channel 2B). If your computer is compatible with a DDC, turn
the projector on according to the following procedures.
1 Connect the projector to the computer.
2 Turn the projector on.
3 Start the computer.
• Input selection is incorrect.
c Select the input source correctly using the INPUT key
(see page 23).
• The picture is muted.
c Press the PIC MUTING key to release the picture muting (see
page 16).
• A black screen is displayed (VPL-CX75 only).
c Press the B key on the presentation tool to release the black
screen (see page 18).
The picture is noisy. • Noise may appear on the background depending on the
combination of the numbers of dot input from the connector and
numbers of pixel on the LCD panel.
c Change the desktop pattern on the connected computer.
The picture from INPUT A
connector is colored
strange.
• Setting of “Input-A Signal Sel.” in the SET SETTING menu is
incorrect.
c Select “Computer,” “Video GBR” or “Component” correctly
according to the input signal (see page 35).
“Please check Input-A
Signal Sel.” appears in
spite of inputting the
correct signal from INPUT
A.
• Setting of “Input-A Signal Sel.” in the SET SETTING menu is
incorrect.
c Select “Computer,” “Video GBR” or “Component” correctly
according to the input signal (see page 35).
On-screen display does not
appear.
• “Status” in the MENU SETTING menu has been set to “Off.”
c Set “Status” in the MENU SETTING menu to “On” (see page
38).
Color balance is incorrect. • Picture has not been adjusted properly.
c Adjust the picture (see page 32).
• Projector is set to wrong color system.
c Set “Color System” in the SET SETTING menu to match the
color system being input (see page 35).
The picture is too dark. • Contrast or brightness has not been adjusted properly.
c Adjust the contrast or brightness in the “Adjust Picture...” menu
properly (see page 32).
• The lamp has burnt or dims.
c Replace the lamp with a new one (see page 42).
- Data Projector 1
- AVOID EXPOSURE LASER 3
- RADIATION IS EMITTED 3
- FROM THIS APERTURE 3
- Table of Contents 5
- “Side Shot” and “V Keystone” 6
- Precautions 7
- Notes on Installation 8
- Toppling the unit 9
- About the Supplied 10
- Features 10
- Off & Go feature 11
- System expandability using a 11
- 12 Features 12
- Location and 13
- Function of Controls 13
- Control Panel 14
- Connector Panel 15
- Remote Commander 16
- 2 Replace the lid 17
- Presentation Tool (VPL-CX75 18
- Installing the Projector 19
- Connecting the 20
- Projector 20
- Connecting with a VCR 21
- Projecting 22
- 24 Projecting 24
- Turning Off the 25
- Selecting the Menu 26
- Language 26
- Security Lock 27
- Other Functions 28
- Off & Go Function 29
- Effective Tools for Your 29
- Presentation 29
- Using the MENU 30
- The PICTURE SETTING Menu 32
- Wide Mode: Off 33
- Adjust Signal 33
- Scan Converter: On 33
- 34 The INPUT SETTING Menu 34
- The SET SETTING Menu 35
- 36 The SET SETTING Menu 36
- Status: On 37
- Language: English 37
- Menu Position: Center 37
- Menu Color: White 37
- The INSTALL SETTING Menu 38
- The INFORMATION Menu 40
- Adjust Picture... menu 41
- INPUT SETTING menu 41
- Replacing the Lamp 42
- 8 Connect the power cord 43
- Cleaning the Air 44
- Troubleshooting 45
- 46 Troubleshooting 46
- 48 Troubleshooting 48
- Caution Messages 49
- Specifications 50
- Laser (VPL-CX75 only) 51
- Optional accessories 51
- Pin assignment 51
- 52 Specifications 52
- 54 Specifications 54
- Input signals a b 56
- AVERTISSEMENT 60
- Table des matières 61
- Entretien 62
- Précautions 63
- Remarques sur 64
- Manuels fournis 66
- Caractéristiques 66
- 10 Caractéristiques 68
- Emplacement et 69
- Panneau de commande 70
- Panneau de connecteurs 71
- Télécommande 72
- Outil de présentation 74
- (VPL-CX75 seulement) 74
- Projection de l’image 75
- Raccordement du 76
- Raccordement à un 77
- Projection 78
- 22 Projection 80
- Mise hors tension 81
- Sélection de la 82
- Verrou. antivol 83
- Autres fonctions 84
- Fonction Off & Go 85
- Utilisation du menu 86
- Menu PARAMÉTRAGE DE L’IMAGE 88
- Entrée A 88
- Mode large: Off 89
- Réglez le singal 89
- Convert. Fréq.: On 89
- 32 Menu RÉGLAGE DE L’ENTRÉE 90
- Menu RÉGLAGE 91
- 34 Menu RÉGLAGE 92
- Menu RÉGLAGE DE MENU 93
- Menu RÉGLAGE D’INSTALLATION 94
- 38 Menu INFORMATIONS 96
- Menu Réglez l’image 97
- Menu RÉGLAGE DE L’ENTRÉE 97
- Remplacement de la 98
- Nettoyage du filtre à 100
- Alimentation 101
- 44 Dépannage 102
- Dépannage 103
- 46 Dépannage 104
- Liste des messages 105
- Spécifications 106
- Laser (VPL-CX75 seulement) 107
- Généralités 107
- Accessoires en option 107
- 50 Spécifications 108
- Signaux préprogrammés 109
- 52 Spécifications 110
- SIDE SHOT 112
- Signaux d’entrée a b 113
- Remarques 113
- Dimensions 114
- 58 Index 116
- ADVERTENCIA 118
- Contenido 119
- Mantenimiento 120
- Precauciones 121
- Notas sobre la 122
- Introducción 123
- Acerca de los 124
- Características 124
- 10 Características 126
- Ubicación y función 127
- Panel de control 128
- Panel de conectores 129
- Mando a distancia 130
- 1 Abra la tapa empujándola y 132
- 2 Vuelva a colocar la tapa 132
- 18 Instalación del proyector 134
- Conexión del 135
- 20 Conexión del proyector 136
- Proyección 137
- 22 Proyección 138
- Apagado de la 140
- Selección del idioma 141
- Bloq. seguridad 142
- Otras funciones 143
- 28 Otras funciones 144
- Función útil 145
- Uso del MENU 146
- ENTRAD A 148
- Modo amplio: No 149
- Ajustar senãl 149
- Conv. explorac: Sí 149
- 34 El menú AJUSTE DE ENTRADA 150
- El menú AJUSTE 151
- 36 El menú AJUSTE 152
- Estado: Si 153
- Idioma: Español 153
- Posición de menú 153
- : Centro 153
- Color de menú: Blanco 153
- 38 El menú AJUSTE INSTALACIÓN 154
- El menú AJUSTE INSTALACIÓN 155
- 40 El menú INFORMACIÓN 156
- Menú Ajustar imagen 157
- Menú AJUSTE DE ENTRADA 157
- Sustitución de la 158
- Limpieza del filtro de 159
- 4 Extraiga el filtro de aire 160
- Alimentación 161
- 46 Solución de problemas 162
- Solución de problemas 163
- 48 Solución de problemas 164
- Mensajes de precaución 165
- Especificaciones 166
- Láser (sólo VPL-CX75) 167
- Accesorios opcionales 167
- 52 Especificaciones 168
- Señales predefinidas 169
- 54 Especificaciones 170
- Señales de entrada a b 173
- Dimensiones 174
- 60 Índice 176
- Printed in Japan 180
Related products and manuals for Home Theater Systems Sony VPL-CX70
Home Theater Systems Sony BDP-A6000 User Manual
(239 pages)
(239 pages)
Home Theater Systems Sony LF-PK1 User Manual
(64 pages)
(64 pages)
Home Theater Systems Sony VPL-ES1 User Manual
(156 pages)
(156 pages)
Home Theater Systems Sony RDR-AT100 User Manual
(176 pages)
(176 pages)
Home Theater Systems Sony KV-24LS35E User Manual
(124 pages)
(124 pages)
© 2020, manymanuals.com. All rights reserved. | 0.667 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals