Sony KDL-40S2510 User Manual download pdf (Page 38)

KDL-46/40/32/26S2000

2-670-908-43(1)

Troubleshooting

Check whether the 1 (standby) indicator is flashing in red.

When it is flashing

The self-diagnosis function is activated.

1 Measure how long the 1 (standby) indicator flashes and stops flashing.

For example, the indicator flashes for two seconds, stops flashing for one second, and flashes for two seconds.

2 Press 1 on the TV (top side) to switch it off, disconnect the mains lead, and inform your dealer or

Sony service centre of how the indicator flashes (duration and interval).

When it is not flashing

1 Check the items in the tables below.

2 If the problem still persists, have your TV serviced by qualified service personnel.

Picture

Problem Cause/Remedy

No picture (screen is dark) and

no sound

• Check the aerial connection.

• Connect the TV to the mains, and press 1 on the TV (top side).

•If the 1 (standby) indicator lights up in red, press "/1.

No picture or no menu

information from equipment

connected to the scart

connector

• Check that the optional equipment is on and press / repeatedly until

the correct input symbol is displayed on the screen.

• Check the connection between the optional equipment and the TV.

Double images or ghosting

• Check aerial/cable connections.

• Check the aerial location and direction.

Only snow and noise appear

on the screen

• Check if the aerial is broken or bent.

• Check if the aerial has reached the end of its serviceable life (three to five

years in normal use, one to two years at the seaside).

Distorted picture (dotted lines

or stripes)

• Keep the TV away from electrical noise sources such as cars, motorcycles,

hair-dryers or optical equipment.

• When installing optional equipment, leave some space between the optional

equipment and the TV.

• Make sure that the aerial is connected using the supplied coaxial cable.

• Keep the aerial cable away from other connecting cables.

Picture noise when viewing a

TV channel

• Select “Manual Programme Preset” in the “Analogue Set-up” menu and

adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception

(page 29).

Some tiny black points and/or

bright points on the screen

• The picture of a display unit is composed of pixels. Tiny black points and/or

bright points (pixels) on the screen do not indicate a malfunction.

No colour on programmes

• Select “Reset” in the “Picture” menu to return to the factory settings

(page 20).

No colour or irregular colour

when viewing a signal from the

Y, P

B/CB, PR/CR jacks of 3

• Check the connection of the Y, PB/CB, PR/CR jacks of 3.

• Make sure that the Y, P

B/CB, PR/CR jacks of 3 are firmly seated in their

respective sockets.

010COV.book Page 38 Monday, November 13, 2006 9:42 AM

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 130 131

Comments to this Manuals

No comments

Sony KDL-40S2510 User Manual Page 38

Comments to this Manuals

Related products and manuals for Home Theater Systems Sony KDL-40S2510