Sony DAV-F500 User Manual download pdf (Page 92)

masterpage:Left

specdef v20070110

filename[E:\sagyou\080603\OLD\3398072142\3398072142\3398072142DAVF500CA2\gb09oth.f

model name [DAV-F500]

[3-398-072-14(2)]

[OFF]: You can set the black level of the output

signal to the standard level.

[ON]: You can raise the standard black level.

Use this when the picture becomes too black.

x [PAUSE MODE] (DVD VIDEO/DVD-R/

DVD-RW only)

You can select the picture in pause mode.

[AUTO]: The picture, including subjects that

move dynamically, is output with no jitter.

Normally select this position.

[FRAME]: The picture, including subjects that

do not move dynamically, is output in high

resolution.

x [HDMI RESOLUTION]

You can select the type of video signal that is

output from the HDMI OUT jack. For details,

see “To select the type of video signal output

from the HDMI OUT jack” (page 35).

[AUTO (1920

× 1080p)]: The system outputs

the optimal video signal for the connected TV.

[1920

× 1080i]: The system outputs 1920 ×

1080i* video signals.

[1280

× 720p]: The system outputs 1280 ×

720p* video signals.

[720

× 480/576p]**: The system outputs 720 ×

480p* or 720 × 576p* video signals.

* i: interlace, p: progressive

** Depending on the country model, [720 × 480p] may

appear.

x [CONTROL FOR HDMI]

You can set the [CONTROL FOR HDMI]

function to on/off. This function is available

when you connect the system and TV with an

HDMI cable. For details, see “Using the Control

for HDMI Function for “BRAVIA” Sync”

(page 66).

[OFF]

: Off.

[ON]: On. You can operate mutually between

components that are connected with an HDMI

cable.

Note

• When you set to [ON] without the HDMI connection

of the TV, [Please verify the HDMI connection.]

appears and you cannot set to [ON].

x [VOLUME LIMIT]

If you change the output method of the TV to the

system speaker on the TV menu or by pressing

THEATER/THEATRE, the System Audio

Control (page 68) is activated and loud sound

may be output depending on the volume level of

the system. You can prevent this by limiting the

maximum level of the volume.

[LEVEL3]: Maximum volume level is set to 15.

[LEVEL2]

: Maximum volume level is set to 20.

[LEVEL1]: Maximum volume level is set to 30.

[OFF]: Off.

Note

• This function is available only when [CONTROL

FOR HDMI] is set to [ON].

x [YCBCR/RGB (HDMI)]

You can select the type of HDMI signal output

from HDMI OUT jack.

[

YCBCR]: The system outputs YCBCR signals.

[RGB]: The system outputs RGB signals.

Note

• If the playback picture becomes distorted, set

[YC

BCR] to [RGB].

• If the HDMI OUT jack is connected to a component

with a DVI jack, [RGB] signals will be automatically

output even when you select [YC

BCR].

Settings for the HDMI

[HDMI SETUP]

HDMI SETUP

CONTROL FOR HDMI:

HDMI RESOLUTION:

VOLUME LIMIT:

AUTO

(1920x1080p)

OFF

LEVEL2

BCR

OFF

YCBCR/RGB(HDMI):

JPEG RESOLUTION:

AUDIO(HDMI):

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 138 139

Comments to this Manuals

No comments

Sony DAV-F500 User Manual Page 92

Comments to this Manuals

Related products and manuals for DVD players Sony DAV-F500