Sony DAV-F500 User Manual download pdf (Page 91)

Other Operation

masterpage:Right

specdef v20070110

filename[E:\sagyou\080603\OLD\3398072142\3398072142\3398072142DAVF500CA2\gb09oth.f

model name [DAV-F500]

[3-398-072-14(2)]

Note

• Depending on the DVD, [4:3 LETTER BOX] may be

selected automatically instead of [4:3 PAN SCAN] or

vice versa.

x [PROGRESSIVE (COMPONENT OUT)]

You can set the progressive signal that is output

from the VIDEO OUT (COMPONENT) jacks to

on/off. For details, see “Does your TV accept

progressive signals?” (page 35).

[OFF]

: The system outputs interlace signals.

[ON]: The system outputs progressive signals.

When you select [ON], follow the Steps below.

1 Select [ON], then press .

The confirmation display appears.

2 Press C/c to select [START], then

press .

The system outputs the progressive signal

for 5 seconds. Check that the screen is

displayed correctly.

3 Press C/c to select [YES], then press

The system outputs the progressive signal.

If you select [NO], the system will not

output the progressive signal.

Note

• [PROGRESSIVE (COMPONENT OUT)] is

effective only when you connect the control unit and

TV with a component video cord (page 21).

x [4:3 OUTPUT]

When you use a 16:9 aspect ratio TV, you can

adjust the aspect ratio to watch 4:3 aspect ratio

signals. If you can change the aspect ratio on

your TV, change the setting on your TV, not the

system.

[FULL]: Select this when you can change the

aspect ratio on your TV.

[NORMAL]: Select this when you cannot

change the aspect ratio on your TV. A 16:9

aspect ratio signal with black bands on left and

right sides of the image appears.

Note

• [4:3 OUTPUT] is effective only when you set [TV

TYPE] in [VIDEO SETUP] to [16:9].

x [COLOR SYSTEM (VIDEO CD)]

(Except for North American, Latin

American and CIS models)

You can select the color system when you play a

VIDEO CD.

[AUTO]

: The system outputs the video signal in

the system of the disc, either PAL or NTSC. If

your TV uses a DUAL system, select [AUTO].

[PAL]: The system changes the video signal of

an NTSC disc and outputs it in the PAL system.

[NTSC]: The system changes the video signal of

a PAL disc and outputs it in the NTSC system.

Note

• You cannot change the color system of the disc itself.

• You can change the color system of this system

according to the connected TV (page 23).

x [BLACK LEVEL]

(North American and Latin American

models only)

You can select the black level (setup level) for

the video signals output from the jacks other

than VIDEO OUT (COMPONENT)/HDMI

OUT.

[ON]

: The standard level.

[OFF]: You can lower the standard black level.

Use this when the picture becomes too white.

x [BLACK LEVEL (COMPONENT OUT)]

(North American and Latin American

models only)

You can select the black level (setup level) for

the video signals output from the VIDEO OUT

(COMPONENT) jacks.

You cannot select this and the setting is not

effective when the system outputs progressive

signal.

16:9 aspect ratio TV

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 138 139

Comments to this Manuals

No comments

Sony DAV-F500 User Manual Page 91

Comments to this Manuals

Related products and manuals for DVD players Sony DAV-F500