masterpage:Right
specdef v20080115
filename[E:\sagyou\080603\OLD\3398072142\3398072142\3398072142DAVF500CA2\gb04gst.f
m]
model name [DAV-F500]
[3-398-072-14(2)]
17
GB
Getting Started
• Do not block the ventilation slots of the subwoofer (page 130).
• Do not place your hand on the speaker driver when lifting the subwoofer. Doing so, the speaker driver may be
damaged. When lifting, hold the foot of the subwoofer.
Ti
• It is recommended to place the subwoofer on a hard floor.
• You can also place the subwoofer either side, facing the listening position.
• When you change the positions of the speakers, Sony recommends that you change the settings. For details, see
“Calibrating the Appropriate Settings Automatically” (page 97).
To install the speakers on a wall
Before installing the speakers on a wall, connect the speaker cord to the speaker.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to 3, and the speaker cord without the color tube to #.
1 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
2 Fasten the screws to the wall.
Speaker driver
Color tube
Front speaker (L): White
Front speaker (R): Red
Center speaker: Green
Surround speaker (L): Blue
Surround speaker (R): Gray
30 mm
4 mm
Hole on the back of
the speaker
5 mm
10 mm
6 to 9 mm
265 mm
For the center speaker
150 mm
For the front and surround speakers
5 to 7 mm
Comments to this Manuals