Sony DAV-DZ150K User Manual download pdf (Page 11)

Getting Started – BASIC –

1 Connecting the Speakers

Required cords

The connector and color tube of the speaker cords are the same color as the label of the jacks to be

connected.

Note

• Do not catch the speaker cord insulation in the SPEAKER jack.

To avoid short-circuiting the speakers

Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these

precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch

another speaker terminal or the bare wire of another speaker cord, such as shown below.

After connecting all the components, speakers, and AC power cord (mains lead), output a test tone to

check that all the speakers are connected correctly. For details on outputting a test tone, see page 78.

If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a speaker

other than the one currently displayed on the Setup Display, the speaker may be short-circuited. If this

happens, check the speaker connection again.

Note

• Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the cords

are reversed, the sound will lack bass and may be distorted.

Color tube

(–)

(+)

To the SPEAKER jack

Stripped speaker cord is touching

another speaker terminal.

Stripped cords are touching each other

due to excessive removal of insulation.

cont

nue

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 103 104

No comments

Sony DAV-DZ150K User Manual Page 11