Sony PSP-3008 Black Base User Manual download pdf (Page 17)

Before requesting service

Troubleshooting

Images do not display.

, Depending on the image data size, certain images are not

viewable.

, If images are edited using a PC, they may not be viewable.

The system does not recognise an image file.

, Check that the data is saved in the correct folder on the Memory

Stick Duo™. For details, refer to the User's Guide ( page 4).

, If the file or folder name on the Memory Stick Duo™ is changed,

or if the file or folder is moved to another location using a PC, the

system may not recognise it.

, Images that are not compatible with the PSP™ system will not be

recognised.

A connection to the network cannot be established.

, Check that the WLAN switch on top of the system is turned on.

, If "WLAN Power Save" under (Power Save Settings) is set to

"On", you may not be able to transmit data correctly.

, There may be too much distance between the system and the

access point or, when in ad hoc mode, between the system and the

other player's system.

, Check that the network settings are correct. Refer to the

instructions supplied with the network equipment and by your

Internet service provider to make the correct network settings.

, Depending on the access point setting, you may need to enter the

system's MAC address. You can check the MAC address under

(System Settings) "System Information".

, When communicating with another system in ad hoc mode, both

systems must be set to the same channel. You can check the

currently set channel under (Network Settings) "Ad Hoc

Mode".

, If a device that causes radio interference such as a microwave oven

is nearby, system communications may not work properly.

The Web page won't display properly.

, Some Web pages may not display properly.

The system or AC Adaptor is warm.

, During use, the system or AC Adaptor may become warm. This is

not a malfunction.

, When the communication function is being used, the system may

become warmer than during normal use. This is not a malfunction.

The system is turned on, but does not operate.

, Check that the system is not in hold mode. If it is, slide the

POWER/HOLD switch up to clear hold mode.

The system does not function properly.

, Static electricity and other similar occurrences may affect the

system's operation. After unplugging the AC Adaptor from the

electrical outlet and disconnecting any other cables, remove the

Battery Pack and AC Adaptor, wait for about 30 seconds and then

restart the system.

, Slide the POWER/HOLD switch up and hold it for at least three

seconds until the POWER indicator turns off. The system will be

completely turned off. Then turn on the system again.

Photo

Network

Other issues

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Comments to this Manuals

No comments

Sony PSP-3008 Black Base User Manual Page 17

Comments to this Manuals

Related products and manuals for Consoles Sony PSP-3008 Black Base