Sony XR-C9100 User Manual download pdf (Page 12)

12

EN

Storing the station names

— Station Memo

You can assign a name to each radio station

and store it in memory. The name of the

station currently tuned in appears in the

display. You can assign a name of up to eight

characters per station.

Storing the station names

1 Tune in a station whose name you want

to store.

2 Press (LIST) for two seconds.

3 Enter the characters.

1 Rotate the dial clockwise to select the

desired characters.

(A n B n C n ··· Z n 0 n 1 n 2 n

··· 9 n + n – n * n / n \ n > n <

n . n _ )

If you rotate the dial counterclockwise,

the characters appear in the reverse

order.

If you want to put a blank space

between characters, select “_” (under-

bar).

2 Press (5) (n) after locating the

desired character.

The flashing cursor moves to the next

space.

If you press (2) (N), the flashing cursor

moves to the left.

3 Repeat steps 1 and 2 to enter the

entire name.

4 To return to the normal radio reception,

press (LIST) for two seconds.

Tip

To erase or correct a name, enter “_” (under-bar)

for each character.

Displaying the station name

Press (DSPL) during radio reception.

Each time you press (DSPL), the item

changes as follows:

$

Station name*

1

$

Frequency

$

Clock

$

MOTION DISPLAY*

2

*

1

If the station name of a station is not stored,

“NO NAME” appears in the display for one

second.

*

2

All the items above are scrolled in the

display one by one in order.

Erasing the station name

1 Tune in any station and press (LIST) for

two seconds.

2 Press (DSPL) for two seconds.

3 Rotate the dial to select the name that

you want to erase.

4 Press (6) (ENTER) for two seconds.

The name is erased.

Repeat steps 3 and 4 if you want to erase

other names.

5 Press (LIST) for two seconds.

The unit returns to the normal radio

reception mode.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments