Sony HT-M7 User Manual download pdf (Page 56)

56

GB

• Check that the subwoofer is connected

correctly and securely.

There is no sound from a specific

equipment.

• Check that the equipment is connected

correctly to the audio input jacks for that

equipment.

• Check that the cord(s) used for the

connection is (are) fully inserted into the

jacks on both the receiver and the

equipment.

• Check the INPUT MODE (page 46).

• Check the setting of “AUDIO.OUT” in the

HDMI menu (page 52).

• Check that the equipment is connected

correctly to the HDMI jack for that

equipment.

• You cannot listen to the Super Audio CD

by connecting HDMI.

• Depending on the playback equipment,

you may need to set up the HDMI setting

of the equipment. Refer to the operating

instructions supplied with each

equipment.

• Be sure to use a High Speed HDMI cable

when you view images or listen to sound,

especially for the 1080p, Deep Color

(Deep Colour) or 3D transmission.

• Audio signals (format, sampling

frequency, bit length, etc.) transmitted

from an HDMI jack may be suppressed by

the connected equipment. Check the setup

of the connected equipment if the image is

poor or the sound does not come out of the

equipment connected via the HDMI cable.

• When the connected equipment is not

compatible with copyright protection

technology (HDCP), the image and/or the

sound from the HDMI TV OUT jack may

be distorted or may not be output. If this is

the case, check the specification of the

connected equipment.

• The image resolution of the playback

equipment may need to be at certain

settings before you can enjoy Multi

Channel Linear PCM. Refer to the

operating instructions of the playback

equipment.

• Make sure the TV is compatible with the

System Audio Control function.

• If the TV does not have System Audio

Control function, set the “AUDIO.OUT”

settings in the HDMI menu to

– “TV+AMP” if you want to listen to the

sound from the TV speaker and receiver.

– “AMP” if you want to listen to the sound

from the receiver.

• When you connect the receiver to a video

equipment (projector, etc.), sound may not

be output from the receiver. In this case,

set the “AUDIO.OUT” to “AMP” in the

HDMI menu (page 52).

• If you cannot listen to the sound of the

equipment connected to the receiver while

a TV is selected on the receiver.

– Be sure to change the input of the

receiver to HDMI when you want to

watch a program on the equipment

connected via HDMI connection to the

receiver.

– Change the TV channel when you want

to watch a TV broadcast.

– Be sure to select the correct equipment

or input you want when you watch a

program from the equipment connected

to the TV. Refer to the operating

instructions of the TV on this operation.

• When using the Control for HDMI

function, you cannot control the connected

equipment using TV’s remote control.

– Depending on the connected equipment

and TV, you may need to set up the

HDMI setting of the equipment and TV.

Refer to the operating instructions

supplied with each equipment and TV.

– Change the input of the receiver to the

HDMI input connected to the

equipment.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Comments to this Manuals

No comments