Sony STR-DB940 User Manual download pdf (Page 51)

Naming Preset Stations and

Program Sources

You can enter a name of up to 8 characters for preset

stations and program sources These names (for example,

"VHS") appear in the receiver's display when a station or

program source is selected

Note that no more than one name can be entered for each

preset station or program source

This function is useful for distinguishing components of

the same kind For example, two VCRs can be specified

as "VHS" and "8mm," respectively It is also handy for

identifying components cormected to jacks meant for

another type of component, for example, a second CD

player cormected to the MD/DAT jacks

1 To index a preset station

Rotate FUNCTION to select the tuner.

The last station you received is tuned in

To index a program source

Select the program source (component) to be

named, then go to Step 3

2 Tune in the preset station you want to create an

index name for.

If you are not familiar with how to tune in preset

stations, see "Tuning to preset stations" on page 46

3 Press NAME

4 Create an index name by using the jog dial and

cursor buttons;

Turn the jog dial to select a character, then press > to

move the cursor to the next position

To insert a space

Turn the jog dial until a blank space appears in the

display (the space character is between

"II"

and "A")

If you've made a mistake

Press <[ or ^ repeatedly until the character to be

changed flashes, then turn the jog dial to select the

right character

5 Press ENTER

To assign index names to other stations

Repeat Steps 2 to 5

Note

(Models of area code CED only)

You cannot change the name of an RDS station

Recording

Your receiver makes it easy to record to and from the

components connected to it You don't have to cormect

the playback and recording components directly to each

other: once you select a program source on the receiver,

you can record and edit as you normally would using the

controls on each component

Before you begin, make sure you've cormected all

components properly

Video signal flow

Reccmiing on an audio tape or MinlDisc

You can record on a cassette tape or MiniDisc using the

receiver See the instruction manual of your cassette deck

or MD deck if you need help

1 Select the component to be recorded

2 Prepare the component for playing

For example, insert a CD into the CD player

3 Insert a blank tape or MD into the recording deck

and adjust the recording level, if necessary

4 Start recording on the recording deck, then start

playback on the playback component

Notes

• You cannot record a digital audio signal using a component

connected to the analog TAPE OUT or MD/DAT OUT jacks

(STR-DB940) or the analog MD/TAPE OUT jacks (STR-DB840)

To record a digital audio signal, connect a digital component to

the DIGITAL MD/DAT OUT jacks

(STR-DB940) or the DIGITAL MD / TAPE OUT jacks

(STR-DB840)

• Sound adjustments do not affect the signal output from the

TAPE OUT or MD/DAT OUT jacks (STR-DB940) or the MD/

TAPE OUT jacks (STR-DB840)

‘C

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 92 93

Comments to this Manuals

No comments

Sony STR-DB940 User Manual Page 51

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Sony STR-DB940