Sony STR-DB940 User Manual download pdf (Page 24)

Before You Use Your Receiver

•o

i/i

There is no sound no matter which component is

seiected.

Check that both the receiver and all components

are turned on

^ Check that the MASTER VOLUME control is not

set at 0

^ Check that the SPEAKERS selector is not set to

OFF or to a position for front speakers that are not

coimected to the receiver (see "i?] SPEAKERS

selector" on page 30)

^ Check that all speaker cords are connected

correctly

^ Press the MUTING button to turn off the indicator

on the button

There's no sound from a specific component.

Check that the component is connected correctly to

the audio input jacks for that component

^ Check that the cord(s) used for the cotmection is

(are) fully inserted into the jacks on both the

receiver and the component

No sound is heard from one of the front

speakers.

^ Coimect a pair of headphones to the PHONES jack

and set the SPEAKERS selector to OFF to verify

that sound is output from the headphones (see "|27|

SPEAKERS selector" and "PHONES jack" on page

30)

If only one chaimel is output from the headphones,

the component may not be cormected to the

receiver correctly Check that all the cords are fully

inserted into the jacks on both the receiver and the

component

If both channels are output from the headphones,

the front speaker may not be coimected to the

receiver correctly Check the connection of the

front speaker which is not outputting any sound

If you encounter a problem that is not included above, see

"Troubleshooting" on page 56

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 92 93

No comments

Sony STR-DB940 User Manual Page 24