Sony MZ-R500PC Operations Instructions download pdf (Page 18)

18-GB

2 Press >MENU. repeatedly

until “SYNC-R” flashes in the

display, and then press ENTER.

“SYNC” lights up in the display.

“SYNC” does not lights up if optical

cable is not connected to the recorder.

3 Press >MENU. repeatedly

until “ON” flashes in the display, and

then press ENTER.

4 Press N while pressing REC.

The recorder stands by for recording.

5 Play the source sound.

The recorder starts recording when it

receives the playing sound.

To stop recording, press x.

z

• You cannot pause manually during synchro-

recording.

• When there is no sound from the player for

more than 3 seconds during synchro-

recording, the recorder goes into the standby

mode automatically. When the sound comes

from the player again, the recorder resumes

synchro-recording. If the recorder is kept in

the standby mode for 5 minutes or longer, the

recorder stops automatically.

• For longer recording, follow steps 1 to 3 of

“Recording for long times” (page 16) to select

the recording mode, and then start the

procedure of synchro-recording.

Notes

• Do not change the “SYNC-R” setting while

recording. Recording may not be done

properly.

• Even when there is no recorded sound on the

sound source, there may be cases when

recording does not pause automatically during

synchro-recording due to the noise level

emitted from the sound source.

• If a silent portion is encountered for 2 seconds

or more during synchro-recording, a new track

mark is automatically added at the point

where the silent portion ends.

• Synchro-recording cannot be done if the

connecting cord is not an optical cable.

• You cannot adjust the recording level

manually during synchro-recording.

Recording without

overwriting existing

material

If you wish to avoid overwriting the

current contents of an MD, do the

following procedure. All new material

will then be recorded from the end of the

current contents.

1 While the recorder is stopped, press

ENTER.

2 Press >MENU. repeatedly

until “R-Posi” flashes in the display,

and then press ENTER.

3 Press >MENU. repeatedly

until “Fr End” flashes in the display,

and then press ENTER.

To start recording from the

current point.

Select “FrHere” in step 3.

Notes

• If you start recording while the recorder is in

play-pause mode, the recording will begin

from the point at which is paused.

• The setting will not be lost after the power is

turned off.

>MENU.

ENTER

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Comments to this Manuals

No comments