Sony FAX-B140 User Manual Page 103
- Page / 119
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
9-13
SOLUTIONS TO COMMON PROBLEMS
9
Copying problems _____________________________
❏ The fax does not make a copy.
The BJ cartridge may need to be replaced.
• Determine if the problem is with the BJ cartridge and replace if necessary (see p. 9-6).
The document may not have been loaded correctly into the document tray.
• Remove the document, stack it if necessary, and load it into the document tray correctly
(see p. 3-2).
•Make sure the printer cover is closed.
The BJ cartridge may not be installed properly.
•Make sure the BJ cartridge is installed properly (see p. 1-9).
The fax may not be operating properly.
• Print the nozzle check pattern (see p. 9-5).
❏ MEMORY FULL appears on the LCD when making multiple copies.
The fax’s memory is full.
• Print or delete any documents stored in memory (see pp. 5-14, 5-15) to free up space in the
fax’s memory, then start again.
• If you have any page fed out without being copied, simply try copying those pages again.
• Change the scanning resolution and try copying again.
The document you are copying may have too many graphics.
• If multiple pages are being copied, separate the pages into smaller stacks. If not, make the
desired number of copies one at a time as needed.
n
For additional troubleshooting, see Print quality problems, p. 9-14.
Telephone problems ___________________________
❏ You cannot dial.
The telephone line may not be connected properly.
•Make sure all line connections are secure (see p. 1-4).
The power cord may not be plugged in securely.
• Check that the power cord is plugged securely into the fax and into the wall outlet (see p. 1-6).
If the fax is plugged into a power strip, make sure the power strip is plugged in and turned on.
The fax may not be set for the type of telephone line in use (pulse/tone).
•Make sure the fax is set for the correct telephone line type (see p. 1-12).
❏ The handset, telephone, or extension phone disconnects while you are
talking.
The power cord may not be plugged in securely.
• Check that the power cord is plugged securely into the fax and into the wall outlet (see p. 1-6).
If the fax is plugged into a power strip, make sure the power strip is plugged in and turned on.
❏ There is interference on the line.
A mobile phone or cordless phone may be in use near the fax.
•Make sure that mobile phones and cordless phones are not used near the fax.
- USER’S GUIDE 1
- Table of Contents 2
- Copyright 4
- Trademarks 4
- Using this guide 5
- Customer support 5
- Important safety instructions 6
- ■ Location 7
- ■ Power supply 7
- Caution (New Zealand only) 8
- Assembling the fax 11
- Making connections 12
- SETTING UP 13
- Loading paper 15
- Installing the BJ cartridge 17
- Setting the TEL LINE TYPE 20
- PREPARING TO USE YOUR FAX 23
- FAX-B140 24
- ■ FAX-B120/B115 25
- ■ FAX-B140 25
- Guidelines for entering 26
- ■ Entering symbols 27
- ■ Identifying your documents 28
- FIRST WEEK 30
- Registering one-touch speed 32
- Registering coded speed 34
- (Fax-B140 only) 35
- DOCUMENTS AND PAPER 37
- Loading documents 38
- Paper requirements 39
- MAKING COPIES 41
- SENDING DOCUMENTS 43
- Sending documents 44
- Cancelling sending 47
- Automatic dialling 47
- Special dialling 50
- Delayed sending 53
- Sequential broadcasting 55
- Documents stored in memory 56
- RECEIVING DOCUMENTS 59
- Setting the receive mode 60
- Other features 63
- Cancelling receiving 64
- Telstra FaxStream™ Duet 65
- (New Zealand only) 66
- (FAX-B140 only) 67
- Setting TAM MODE 68
- Recording voice memos 72
- Deleting messages 73
- Playing telephone messages 74
- Remote control features 75
- Forwarding telephone messages 78
- FWD TEL NUMBER 79
- SETTINGS AND ACTIVITY REPORTS 83
- USER SETTINGS 84
- TX SETTINGS 85
- REPORT SETTINGS 85
- PRINTER SETTINGS 86
- RX SETTINGS 86
- SYSTEM SETTINGS 87
- TAM SETTINGS (FAX-B140 only) 88
- Activity reports 89
- Memory clear report, p. 9-19 90
- 3 Press [Stop] 92
- Periodic cleaning 93
- Troubleshooting 98
- Sending problems 99
- Receiving problems 100
- ❏ Print quality is poor 101
- ❏ Fax does not print 102
- SOLUTIONS TO COMMON PROBLEMS 103
- LCD messages 105
- Message Cause Action 106
- In case of a power failure 109
- Specifications 111
© 2020, manymanuals.com. All rights reserved. | 1.124 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals