Sony DVP-NC615 User Manual download pdf (Page 19)

Hookups

A If you are connecting to a SCART (EURO AV) input jack

Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to

avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV

conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to

be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN SETUP”

in the Setup Display (page 63), use a SCART (EURO AV) cord that conforms to each signal.

B If you are connecting to a video input jack

Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will

enjoy standard quality images.

Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are

connecting to a TV only.)

C If you are connecting to an S VIDEO input jack

Connect an S VIDEO cord (not supplied). You will enjoy high quality images.

Notes

• Connect the player directly to the TV. If you pass the player signals via the VCR, you may not receive a

clear image on the TV screen.

• When you connect the player to your TV via the SCART (EURO AV) jack, the TV’s input source is set to

the player automatically when you start playback or press any button except for \/1. In this case, press TV/

DVD on the remote to return the input to the TV.

Yellow (Video)

White (L)

Red (R)

Yellow (Video)

White (L)

Red (R)

When you play a disc recorded in the NTSC colour system, the player outputs the video

signal or the Setup Display etc. in the NTSC colour system and the picture may not appear

on the PAL colour system televisions. In this case, open the tray and remove the disc.

VCR

CD/DVD player

Connect

directly

c continued

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 75 76

No comments

Sony DVP-NC615 User Manual Page 19