Sony CMT-M90DVD User Manual download pdf (Page 46)

CMT-M90DVD 4-239-826-11(1) GB

Listening to audio from a

connected component

1 Connect the audio cords.

2 Press FUNCTION repeatedly until “MD”

or “VIDEO” appears.

Start playing the connected component.

Tip

If you cannot select “VIDEO” by pressing

FUNCTION repeatedly, turn off the system, then

press ?/1 while pressing FUNCTION. The function

will change from “MD” to “VIDEO”, and “VIDEO”

will appear in the display. To change back to “MD”,

repeat this procedure.

Note

You cannot perform the above procedure during

Power Saving Mode.

Enjoying the 5.1 channel

sound with the optional

amplifier

By connecting this unit to the optical input jack

of the optional amplifier eqipped with Dolby

Digital or DTS decoder, you can enjoy the 5.1

channel sound. Connect 6 speakers to the

amplifier.

For the speaker placement, refer to the

operating instructions supplied with the

amplifier.

1 Connect the digital optical cable.

2 Press FUNCTION repeatedly until

“DVD” appears.

Tip

It is recommended to use the surround effect such as

5.1 channel Dolby Digital or DTS sound through the

amplifier. You cannot use the surround effect of this

unit.

Note

When you enjoy the 5.1 channel sound through the

optional amplifier, set the volume on this unit to

minimum.

Recording on a connected

component

1 Connect the digital optical cable.

2 Start recording.

Refer to the operating instructions provided

with connected component.

Note

You can digitally record from the discs only.

However, you cannot record from copy prohibited

discs.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

Comments to this Manuals

No comments

Sony CMT-M90DVD User Manual Page 46

Comments to this Manuals

Related products and manuals for DVD players Sony CMT-M90DVD