Sony VPL-PX11 User Manual download pdf (Page 15)

15 (GB)

Installing the Projector / Connecting the Projector

Installing the Projector

This section describes how to install the projector.

For details, see “Installation Example” on page 29 (GB).

For details on ceiling installation, consult with qualified

Sony personnel (fee charged).

Distance between the screen

and the center of the lens

Unit: m (feet)

Screen

size 40 60 80 100 120 150 180 200 250 300

(inches)

Minimum 1.5 2.2 3.0 3.7 4.5 5.6 6.8 7.5 9.4 11.3

Distance (4.8) (7.3) (9.8) (12.3) (14.8) (18.5) (22.3) (24.8) (31.0) (37.3)

Maximum 1.8 2.7 3.6 4.5 5.4 6.8 8.1 9.1 11.3 13.6

Distance (5.8) (8.8) (11.8) (14.8) (17.8) (22.2) (26.7) (29.7) (37.2) (44.7)

PUSH

Connecting the Projector

When making connections, be sure to do the

following:

• Turn off all equipment before making any

connections.

•Use the proper cables for each connection.

• Insert the cable plugs properly; plugs that are not

fully inserted often generate noise or cause picture

degradation. When pulling out a cable, be sure to

pull it out grasping the plug, not the cable itself.

Connecting to a Computer

This section describes how to connect the projector to

a computer.

For more information, refer to the computer’s

instruction manual.

Notes

• The projector accepts VGA, SVGA, XGA, and

SXGA signals. However, we recommend that you

set the output mode of your computer to XGA mode

for the external monitor.

• If you set your computer, such as a notebook type, to

output the signal to both your computer’s display and

an external monitor, the picture of the external

monitor may not appear properly. Set your computer

to output the signal to only the external monitor.

For details, refer to the operating instructions supplied

with your computer.

• This projector is compatible with DDC2B (Display

Data Channel 2B). If your computer is compatible

with DDC

, turn the projector on according to the

following procedures.

1 Connect the projector to the computer using the

supplied HD D-sub 15-pin cable.

2 Turn the projector on.

3 Start the computer.

.........................................................................................................................................................................................................

1) DDC™ is a registered trademark of the Video Electronics Standards Association.

Setting Up and Projecting

The distance between the lens and the screen varies

depending on the size of the screen. Use the following

table as a guide.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 111 112

Comments to this Manuals

No comments

Sony VPL-PX11 User Manual Page 15

Comments to this Manuals

Related products and manuals for Data projectors Sony VPL-PX11