Sony MHC-RX70 User Manual download pdf (Page 43)

To check the setting

Press TIMER SELECT and turn the jog dial to

select “REC”, then press ENTER/NEXT. To

change the setting, start over from step 1.

To cancel the timer operation

Press TIMER SELECT and turn the jog dial to

select “OFF”, then press ENTER/NEXT.

Notes

• When setting the timer-recording, set the equalizer

display to anything other than Spectrum analyzer

pattern 3. (See “To change the equalizer display”

on page 30.)

• If the power is on at the preset time, the recording

will not be made.

3 Turn jog dial to select REC, then

press ENTER/NEXT.

“ON” appears and the hour digits flash

in the display.

4 Set the time to start recording.

Turn jog dial to set the hour, then press

ENTER/NEXT.

The minute indication starts flashing.

Turn jog dial to set the minute, then

press ENTER/NEXT.

The hour indication flashes again.

5 Set the time to stop recording

following the above procedure.

The start time appears, followed by the

stop time, the recording source and the

radio station, then the original display

appears.

6 Insert a recordable tape.

7 Turn off the power.

When the recording starts, the volume

level is set to the minimum.

VOLUME

REC

VOLUME

REC

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50

No comments

Sony MHC-RX70 User Manual Page 43