Sony HDR-TD10E User Manual download pdf (Page 24)

Tips

See page 59 on the recordable time of 2D movies.

You can record photos during movie recording by pressing PHOTO fully (Dual Rec).

[

SteadyShot] is set to [Active] in the default setting.

You can specify the priority face by touching it.

You can capture photos from recorded movies.

You can check the recordable time, estimated remaining capacity, etc., by touching

(MENU) 

[Setup]  [

( Media Settings)]  [Media Info].

The LCD screen of your camcorder can display recording images across the entire screen (full pixel

display). However, this may cause slight trimming of the top, bottom, right and left edges of images when

played back on a TV which is not compatible with full pixel display. In the case of 2D recording, set

[Guide Frame] to [On], and record images using the outer frame displayed on the screen as a guide.

To adjust the angle of the LCD panel, first open the LCD panel 90 degrees to the camcorder (), and

then adjust the angle ().

Watch 3D movies on the LCD screen squarely from about 30 cm (11 7/8 in.) away.

Data code during recording

The recording date, time and condition are recorded automatically on the recording media.

They are not displayed during recording. However, you can check them as [Data Code]

during playback. To display them, touch

(MENU)  [Setup]  [ ( Playback

Settings)]  [Data Code]  a desired setting 

 .

Shooting photos

When disappears, the photo is recorded.





 90 degrees to the

camcorder

 180 degrees (max.)

 90 degrees (max.)

2D/3D switch

PHOTO button

Flashes  Lights up

(Movie): When recording a movie

(Photo): When recording a photo

MODE button

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 71 72

No comments

Sony HDR-TD10E User Manual Page 24