Sony BDP-SX1 User Manual download pdf (Page 24)

GB

24

Playback does not start from the

beginning of content.

, Press OPTIONS, and select “Play from

start.”

Playback does not start from the resume

point where you last stopped playing.

, The resume point may be cleared from

memory when

– you open the disc lid.

– you disconnect the USB device.

– you play other content.

– you turn off the player.

– you change some settings under the

“Setup.”

The player does not respond to any button.

, The ?/1/HOLD switch is set in the

direction of HOLD.

, Moisture has condensed inside the player

(page 4).

, Slide the ?/1/HOLD switch in the direction

of ?/1 and hold for 10 seconds. Then, turn

on the power again.

The player does not detect a USB device

connected to the player.

, Make sure that the USB device is securely

connected to the USB jack.

, Check if the USB device or a cable is

damaged.

, Check if the USB device is on.

, If the USB device is connected via a USB

hub, connect the USB device directly to the

player.

The player cannot connect to the network.

, Check the network connection (page 13)

and the network settings (page 22).

The message “A new software version is

available. Please go to the "Setup" section

of the menu and select "Network update"

to perform the update.” appears on the

screen when turning the player on.

, See “Network Update” (page 18) to update

the player to a newer software version.

There is no picture or the picture is not

output correctly.

, Check that all the connecting cables are

securely connected.

, Switch the input selector on your TV to

display the signal from the player.

, For HDMI connections, try the following:

1Turn the player off and on again. 2Turn

the connected equipment off and on again.

3Disconnect and then reconnect the HDMI

cable.

, The HDMI OUT jack is connected to a DVI

device that does not support copyright

protection technology.

, For HDMI connections, check the “HDMI/

LCD Video Format” settings in the “Screen

Settings” setup (page 19).

, For BD-ROMs, check the “BD/DVD-ROM

1080/24p Output” setting in the “Screen

Settings” setup (page 19).

, The pictures are displayed in standard

quality on the HDMI-connected TV when

the audio/video cable is connected at the

same time. Disconnect the audio/video

cable to enjoy high quality digital pictures

on the HDMI-connected TV.

Operations

USB device

Network connection

Hookup

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 183 184

Comments to this Manuals

No comments