Sony CPD-G420 Operations Instructions download pdf (Page 17)

Restoring the color from the EASY, PRESET, or

sRGB modes (IMAGE RESTORATION)

The colors of most display monitors tend to gradually change

brilliance over several years of service. The IMAGE

RESTORATION feature found in the EASY, PRESET, and

sRGB menus allows you to restore the color to the original factory

quality levels. The explanation below explains how to restore the

monitor’s color from the EASY mode for example.

First, select the EASY, PRESET, or sRGB mode in the OPTION

menu (page 15).

Press the MENU button.

The menu appears on the screen.

Move the control button up or down to highlight

COLOR and press the control button.

The COLOR menu appears on the screen.

Move the control button up or down to highlight

IMAGE RESTORATION. Then press the control

button.

Move the control button up or down to select OK.

Then press the control button.

The picture disappears while the color is being restored (about

2 seconds). After the color is restored, the picture reappears

on the screen again.

Notes

• Before using this feature, the monitor must be in normal operation

mode (green power indicator on) for at least 30 minutes. If the monitor

goes into power saving mode, you must return the monitor to normal

operation mode and wait for 30 minutes for the monitor to be ready.

You may need to adjust your computer’s power saving settings to keep

the monitor in normal operation mode for the full 30 minutes. If the

monitor is not ready, the following message will appear.

• The monitor may gradually lose its ability to perform this function due

to the natural aging of the picture tube.

Additional settings (OPTION)

You can lock the controls, change the on-screen language, change

the menu position, and set the COLOR mode.

Press the MENU button.

The menu appears on the screen.

Move the control button up or down to highlight

OPTION and press the control button.

The OPTION menu appears on the screen.

Move the control button up or down to select the

desired adjustment item.

Adjust the selected item according to the following

instructions.

Locking the controls (CONTROL LOCK)

You can protect the adjustment data by locking the

controls. Move the control button up or down to

highlight (CONTROL LOCK) and press the control

button. Then move the control button up or down to

select ON and press the control button.

Only the ! (power) switch, MENU button, INPUT switch, and

(CONTROL LOCK) of the OPTION menu will operate.

If any other items are selected, the mark appears on the

screen.

To cancel the control lock

Repeat the procedure above and set (CONTROL LOCK) to OFF.

Changing the on-screen language

(LANGUAGE)

See page 8.

Changing the menu’s position

(OSD POSITION)

Change the menu’s position if it is blocking an image on the

screen.

Move the control button up or down to select (OSD

POSITION) for horizontal adjustment, or (OSD

POSITION) for vertical adjustment and press the

control button. Then move the control button up or

down to shift the on-screen menu.

Setting the COLOR mode

See page 15.

I MAGE

RESTORAT I ON

CANCEL

COLOR

XIT

I MAGE

RESTORAT I ON

AVA

AFTER

WARM UP

LABLEI

COLOR

XIT

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 69 70

Comments to this Manuals

No comments

Sony CPD-G420 Operations Instructions Page 17

Comments to this Manuals

Related products and manuals for TVs & monitors Sony CPD-G420