Sony CPD-E540 Operations Instructions download pdf (Page 8)

Preset and user modes

When the monitor receives an input signal, it automatically matches the

signal to one of the factory preset modes stored in the monitor’s memory

to provide a high quality picture

(see “Preset mode timing table” on

page i)

. If the input signals does not match one of the factory preset

modes, the monitor automatically provides the most appropriate picture

for the input signal that is within the range of the vertical or horizontal

frequencies (page 7) corresponding to the Generalized Timing Formula.

When the picture is adjusted, the adjustment data is stored as a user mode

and automatically recalled whenever the same input signal is received.

Power saving function

This monitor meets the power-saving guidelines set by VESA, ENERGY

STAR, and NUTEK. If no signal is input to the monitor from your

computer, the monitor will automatically reduce power consumption as

shown below.

When your computer enters power saving mode, NO SIGNAL appears

on the screen. After a few seconds, the monitor enters power saving

mode.

“Deep sleep” is power saving mode defined by the Environmental

Protection Agency.

Design and specifications are subject to change without notice.

Precautions

Warning on power connections

• Use the supplied power cord. If you use a different power cord,

be sure that it is compatible with your local power supply.

For the customers in the U.S.A.

If you do not use the appropriate cord, this monitor will not

conform to mandatory FCC standards.

Example of plug types

• Before disconnecting the power cord, wait at least 30 seconds

after turning off the power to allow the static electricity on the

screen’s surface to discharge.

• After the power is turned on, the screen is demagnetized

(degaussed) for about a few seconds. This generates a strong

magnetic field around the screen which may affect data stored

on magnetic tapes and disks placed near the monitor. Be sure to

keep magnetic recording equipment, tapes, and disks away

from the monitor.

Installation

Do not install the monitor in the following places:

• on surfaces (rugs, blankets, etc.) or near materials (curtains,

draperies, etc.) that may block the ventilation holes

• near heat sources such as radiators or air ducts, or in a place

subject to direct sunlight

• in a place subject to severe temperature changes

• in a place subject to mechanical vibration or shock

• on an unstable surface

• near equipment which generates magnetism, such as a

transformer or high voltage power lines

• near or on an electrically charged metal surface

• inside an enclosed rack

Protection

• Do not put foreign objects into the monitor.

• Disconnect the monitor if environment exceeds 60°C/140°F.

• Ensure AC power cord is not trapped under furniture, TV, etc.

• Do not overload wall outlets, extension cords, or convenience

receptacles beyond their capacity.

• Never spill liquid of any kind on the monitor.

Notes on cleaning the screen’s surface

• The screen’s surface is covered with a thin anti-reflective

coating to enhance the ergonomic characteristics of the

monitor. To ensure that the coating is not damaged, use a soft

cloth to clean the screen’s surface. If necessary, use a soft cloth

lightly moistened with a mild detergent solution, such as hand

soap, to wipe the screen.

• Do not use any type of abrasive pad, alkaline cleanser, scouring

powder, or solvents such as alcohol or benzene as they might

damage the anti-reflective coating.

• If you use a glass cleaning liquid, do not use any type of cleaner

containing an anti-static solution or similar additive as this may

scratch the screen’s coating.

• Do not rub, touch, or tap the surface of the screen with sharp or

abrasive items such as a ballpoint pen or screwdriver. This type

of contact may result in a scratched picture tube.

Notes on cleaning the cabinet

• Clean the cabinet, panel and controls with a soft cloth lightly

moistened with a mild detergent solution.

• Do not use any type of abrasive pad, scouring powder or

solvent, such as alcohol or benzene.

Power mode Power consumption ! (power)

indicator

normal operation ≤ 135 W green

active off*

(deep sleep)*

≤ 3 W orange

power off Approx. 0 W off

The equipment should be installed near an easily accessible

outlet.

for 100 to 120 V AC for 200 to 240 V AC

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments

Sony CPD-E540 Operations Instructions Page 8

Comments to this Manuals

Related products and manuals for TVs & monitors Sony CPD-E540