Sony CPD-E500E User Manual download pdf (Page 14)

Resetting the adjustments

This monitor has the following three reset methods. Use the

RESET button to reset the adjustments.

Resetting a single adjustment item

Use the control button to select the adjustment item you want to

reset, and press the RESET button.

Resetting all of the adjustment data for the

current input signal

Press the RESET button when no menu is displayed on the screen.

Note that the following items are not reset by this method:

• on-screen menu language (page 7)

• adjustment mode in the COLOR menu (EASY, EXPERT,

sRGB) (page 12)

• on-screen menu position (page 13)

• control lock (page 13)

Resetting all of the adjustment data for all input

signals

Press and hold the RESET button for more than two seconds.

Note

The RESET button does not function when

(CONTROL LOCK)

is set to ON.

Technical Features

Preset and user modes

When the monitor receives an input signal, it automatically

matches the signal to one of the factory preset modes stored in the

monitor’s memory to provide a high quality picture at the center of

the screen.

(See Appendix for a list of the factory preset modes.)

For input signals that do not match one of the factory preset modes,

the digital Multiscan technology of this monitor ensures that a

clear picture appears on the screen for any timing in the monitor’s

frequency range (horizontal: 30 – 109 kHz, vertical: 48 – 160 Hz).

If the picture is adjusted, the adjustment data is stored as a user

mode and automatically recalled whenever the same input signal

is received.

Note for Windows users

For Windows users, check your video board manual or the utility

program which comes with your graphic board and select the

highest available refresh rate to maximize monitor performance.

Power saving function

This monitor meets the power-saving guidelines set by VESA,

NERGY

TAR, and NUTEK. If the monitor is connected to a

computer or video graphics board that is DPMS (Display Power

Management Signaling) compliant, the monitor will automatically

reduce power consumption in three stages as shown below

* “Sleep” and “deep sleep” are power saving modes defined by the

Environmental Protection Agency.

** When your computer enters in a power saving mode, the input signal

is cut and NO INPUT SIGNAL appears on the screen. After a few

seconds, the monitor enters power saving mode.

RESET

Power mode Power consumption

(power)

indicator

normal

operation

≤ 145 W green

1 standby ≤ 15 W green and orange

alternate

2 suspend

(sleep)*

≤ 15 W green and orange

alternate

3 active off**

(deep sleep)*

Approx. 1 W orange

power off 0 W off

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 131 132

Comments to this Manuals

No comments

Sony CPD-E500E User Manual Page 14

Comments to this Manuals

Related products and manuals for TVs & monitors Sony CPD-E500E