Sony STR-DE1015G User Manual Page 54

  • Download
  • Add to my manuals
  • Print
  • Page
    / 68
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 53
54
Front Panel Operations (Remote Short-cuts: USA and Canada only)
nA1˜A2˜...A9˜A0˜B1˜B2˜...B9˜B0N
nC0˜C9...C2˜C1N
Selecting a component directly from the
remote control (USA and Canada only)
1 Press one of the SYSTEM CONTROL FUNCTION
buttons to select the component you want to use.
The receiver and the selected component turn on.
The SYSTEM CONTROL FUNCTION buttons on
the remote are factory-set as follows:
To listen to or watch Press*
Records PHONO
Radio programs TUNER
Compact Discs (CD) CD
Digital Audio Tapes (DAT) DAT/MD
or MiniDiscs (MD)
Audio tapes TAPE
TV programs or video tapes VIDEO 1, VIDEO 2
or VIDEO 3
Laser discs/DVD LD/DVD
Digital program sources INPUT MODE
(STR-DE1015G only)
Decoded AC-3 programs 5.1 INPUT
(STR-DE815G / D760Z only)
* “NO CONNECTION” is displayed if you select a
function that was set to “NO” in the FUNCTION set
up menu (see page 58 or 59).
If the component does not turn on
Press the power switch on the component.
2 Start playing.
Refer to “Remote Descriptions” on page 52 for
details.
To turn off the components
Press SYSTEM OFF. This will also turn off the video and
audio components connected to the SWITCHED AC
OUTLETs on the back of this unit at the same time.
Tuning Radio Stations
The receiver lets you tune a station by scanning
stations (Automatic Tuning), and by selecting preset
stations (Preset Tuning).
For the on-screen operations, see pages 29 to 30.
1 Press AUDIO FUNCTION repeatedly to display
“TUNER,” then press FM/AM to select FM or
AM.
2 Press DISPLAY so that the frequency appears.
3 Press TUNING + or –.
The frequency indication changes and scanning
stops when the receiver tunes in a station. To
continue scanning, press + or – again. Press + for
a higher station number; press – for a lower one.
Tuning preset stations (Preset Tuning)
1 Press AUDIO FUNCTION repeatedly to display
“TUNER”.
2 Press SHIFT to select a memory page (A, B or C).
3 Press PRESET TUNING + or – repeatedly to select
the station you want. Each time you press the
buttons, the preset numbers change as follows:
Note
If the AC power cord is disconnected for about 1 week, the
preset stations will be cleared. Preset the stations again.
Page view 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 67 68

Comments to this Manuals

No comments