Sony VPL-CX85 User Manual download pdf (Page 29)

29

GB

Other Functions

Convenient Function

* Also available when not using the Air Shot.

If there is any obstruction between the

presentation tool and the remote control

detector on the projector, the presentation tool

may not function properly.

If you are leaving the conference room

immediately, turn the projector off, and then,

after the lens protector closes and the

powered tilt adjuster is put away in the

projector, you can unplug the AC power

cord. After the AC power cord is unplugged,

the fan runs automatically.

• When unplugging the AC power cord, ensure

that the lens protector closes and the powered

tilt adjuster is put away in the projector.

Moving the projector with the powered tilt

adjuster rised may damage the adjuster.

• Turn off the projector according to the

procedure in “Turning off the power”, then

cool it down when storing the projector in the

carrying case.

If you will be using a circuit breaker to turn

the power for the entire system on and off,

set the direct power on function to “On.”

When you turn off the power, you can also

just unplug the power cord without pressing

the I / 1 key. The internal circuitry will

cause the fan to automatically operate for a

certain time even after the power cord is

removed.

However, if the unit has been on for less than

15 minutes, the fan might not begin to turn as a

result of inadequate charging. In that case,

follow the procedure for turning off the power

as described in “Turning Off the Power” on

page 25.

To enlarge the image (Digital Zoom

function)

You can select a point in the image to

enlarge. This function works when a signal

from a computer is input, or when a still

picture (except a movie picture) stored in a

Memory Stick is projected.

This function does not work when a video

signal is input.

1 Project a normal image, and press the

D ZOOM + key on the Remote

Commander.

The digital zoom icon appears in the

center of the image.

2 Move the icon to the point on the

image you want to enlarge. Use the

arrow key (M/m/</,) to move the

icon.

3 Press the D ZOOM + key again.

The image where the icon is located is

enlarged. The enlargement ratio is

displayed on the screen for a few

seconds.

By pressing the + key repeatedly, the

image size increases (ratio of

enlargement: max. 4 times.)

Key Function

LASER Emits a laser beam.

*

G SLIDE g Changes the slides in

the forward/backward

direction.

B Displays/cancels a

black screen during the

slide show.

Note

Off & Go Function

Notes

Direct Power On/Off Function

Note

Effective Tools for Your

Presentation

Digital zoom

icon

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 191 192

Comments to this Manuals

No comments