Sony MZ-R55 User Manual download pdf (Page 56)

56

Erasing a whole disc

See the illustration in the Japanese text

(page 24).

You can erase all the tracks on a disc at a

time. Note that once a recording has been

erased, you cannot retrieve it.

1 Press EDIT/ENTER on the recorder.

2 Press = or + repeatedly until

” : Erase” flashes in the display.

3 Press EDIT/ENTER again.

”All Erase?” and ”Push ENTER”

appear alternately in the display.

To cancel erasing, press p or T MARK.

4 Press EDIT/ENTER again.

”Toc Edit” flashes in the display, and

all the tracks will be erased.

When erasing is complete, ”BLANK

DISC” appears in the display.

Adding a track mark

See the illustration in the Japanese text

(page 25).

You can insert a track mark into a track.

1 While the recorder is playing or

pausing an MD, press T MARK on the

recorder at the point you want to

mark.

"MARK ON" appears in the display,

and the track mark is added.

To add track marks while recording.

Press T MARK while recording (except while

Synchro-recording).

zEditing recorded tracks

You can edit your recordings.

Premastered MDs cannot be edited.

Notes

• When you press p after editing, "Toc Edit"

flashes for about a second. Do not move or

jog the recorder or disconnect the power

source while the indication is flashing.

• You cannot edit on an MD with its tab open

for protection. Before editing, close the tab at

the side of the MD.

Erasing a track

See the illustration in the Japanese text

(page 24).

You can quickly erase a recorded track.

Note that once a recording has been erased,

you cannot retrieve it.

1 Press EDIT/ENTER while playing the

track you want to erase.

” : Name” flashes in the display,

and the recorder plays the selected

track repeatedly.

2 Press = or + repeatedly until

” : Erase” flashes in the display.

3 Press EDIT/ENTER again.

”Erase OK?” and ”Push ENTER”

appear alternately in the display.

To cancel erasing, press p or T MARK.

To erase a part of a track

Add track marks at the beginning and the

end of the part you want to erase, then

erase the part.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Comments to this Manuals

No comments